Document IIF

Modélisation dynamique détaillée du conditionneur d'air multi-split.

A detailed dynamic modeling of the split-type air conditioner.

Numéro : pap. n. 459

Auteurs : YANG Y., REN C. Q., YU L., et al.

Résumé

For the distributed parameter model for vapor compression cycle systems (VCCs), there are several assumptions compromising the simulation accuracy. Such as the refrigerant-side pressure drop is neglected, the accumulator, connecting pipe and compressor lubricant are not considered sometimes and so on. In this paper, a detailed dynamic model of split-type air conditioner was developed based on SIMULINK. This system model contains multiple sub-models including the evaporator, the condenser, the compressor, the electronic expansion valve, the accumulator, and the pipe. The evaporator and condenser were modeled using the distributed-parameter method with the estimated refrigerant-side pressure drop. The accumulator with lubricant and connecting pipe adopted the single-node lumped parameter model. Thereafter, the model was verified via experimental data. The results showed that the system dynamic was captured accurately.

Documents disponibles

Format PDF

Pages : 8

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : A detailed dynamic modeling of the split-type air conditioner.
  • Identifiant de la fiche : 30026419
  • Langues : Anglais
  • Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
  • Date d'édition : 24/08/2019
  • DOI : http://dx.doi.org/10.18462/iir.icr.2019.0459

Liens


Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence