Partager

Analyse de la performance thermique d'un compresseur à piston avec un système de régulation continue de la puissance.

Thermal performance analysis of reciprocating compressor with stepless capacity control system.

Auteurs : BIN T., YUANYANG Z., LIANSHENG L., et al.

Type d'article : Article

Résumé

On the basic principle of stepless capacity control system for large reciprocating compressor, the thermal cycle was analyzed. The equations for the process of suction, reverse flow, compression, discharge and expansion of clearance gas were established. According to these equations, p–V diagrams at various situations were simulated. An experimental platform was setup and the compressor with designed stepless capacity control system run well. The experimental results show that the capacity of compressor can be regulated steplessly, and the motor power is reduced proportionally with respect to the reduction of capacity. During the suction process, both the flow resistance of valve and the pressure fluctuation in cylinder can be reduced by opening the suction valves with the actuators. The simulated and experimental results showed good coincidence. The clearance volume and valve clearance Mach number had a negative influence on the thermal performance of compressor with stepless capacity control system.

Détails

  • Titre original : Thermal performance analysis of reciprocating compressor with stepless capacity control system.
  • Identifiant de la fiche : 30007842
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 54 - n. 2
  • Date d'édition : 05/2013
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2013.01.036

Liens


Voir d'autres articles du même numéro (5)
Voir la source

Indexation