Document IIF

Analyse de performance d’un nouveau cycle à injection de vapeur hybride avec un sous-refroidisseur et un réservoir de détente pour les pompes à chaleur aérothermiques.

Performance analysis of a novel hybrid vapor injection cycle with subcooler and flash tank for air-source heat pumps.

Auteurs : QI H., LIU F., YU J.

Type d'article : Article, Article de la RIF

Résumé

In this paper, a novel hybrid vapor injection cycle (HVIC) with subcooler and flash tank for air-source heat pumps is proposed. In the HVIC, an ejector is applied to realize the advantages of both the subcooler and flash tank vapor injection, which can efficiently reduce the irreversible thermodynamic loss and improve the system performance, especially at low ambient temperature conditions. The performance enhancement potential of HVIC is compared with conventional subcooler vapor injection cycle (SVIC) and flash tank vapor injection cycle (FTVC) using cycle simulations. The simulation results indicated that for the HVIC using R290 as refrigerant, the coefficient of performance (COP) and the volumetric heating capacity can be increased by 2.8–3.3% and 6.4–8.8% compared to the SVIC system, 1.1–2.0% and 3.2–6.0% com- pared to the FTVC system, respectively. In addition, improving the ejector efficiencies and adjusting the injection pressure could also enhance the performance of HVIC. Exergy analysis indicates that the total exergy destruction for the HVIC is lower than that of SVIC and FTVC due to the application of an ejector, and therefore resulting in higher exergy efficiency. Overall, the HVIC could be more effective to enhance heating capacity and system efficiency.

Documents disponibles

Format PDF

Pages : 538-547

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Performance analysis of a novel hybrid vapor injection cycle with subcooler and flash tank for air-source heat pumps.
  • Identifiant de la fiche : 30020536
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 74
  • Date d'édition : 02/2017

Liens


Voir d'autres articles du même numéro (56)
Voir la source