Partager

Analyse empirique de perte indiquée d'un compresseur commercial léger semi-hermétique à bobine.

Empirical indicated loss analysis of a semi-hermetic light-commercial spool compressor.

Numéro : 1236

Auteurs : YARBOROUGH S., BRADSHAW C. R., OROSZ J., KEMP G.

Résumé

An analysis of the indicated losses is presented for a semi-hermetic, light-commercial, prototype, spool compressor. The spool compressor prototype was instrumented with five high-speed pressure sensors, three in the process chamber, one in the discharge valve plenum, and one in the motor cavity. These sensors were triggered with a proximity sensor actuated by means of a custom rotary fixture attached to the compressor motor shaft. This coupling of rotational position and pressure measurements allowed for the development of an indicator (pressure v. volume) diagram for the compression process. Additionally, the added sensor in the discharge valve plenum allowed for a de-coupling of discharge valve losses and flow losses within the discharge plenum itself. The sensor in the motor cavity allowed for an analysis of the flow losses leaving the compressor shell. The compressor was tested at five motor speeds (1100, 1300, 1500, 1700 rpm and line voltage) at saturated condensing (SDT) and evaporating (SST) temperatures ranging from 37.8 – 48.9 °C (90 – 130 °F) and -3.8 – 15.6 °C(30 -60 °F), respectively at a fixed suction superheat of 11.1 K (20 °R) . Quantitative analysis shows that the suction and compression losses for this prototype compressor are relatively small compared with the discharge/valve losses. The total losses during the discharge process are generated by pressure drop and backflow through the discharge valve ports as well as when gas flows from the discharge plenum across the motor through the compressor body. It was found that a 5-6% improvement in compressor efficiency can be accomplished by redesigning the discharge plenum and motor cavity to reduce over pressurization. Further investigation into the valve dynamics need to be performed to improve the 11-12% loss in the valves. The valve losses were found to be sensitive to operating speed and SDT with maximum variations of 5% and 3%, respectively.

Documents disponibles

Format PDF

Pages : 10

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Empirical indicated loss analysis of a semi-hermetic light-commercial spool compressor.
  • Identifiant de la fiche : 30028357
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 2021 Purdue Conferences. 25th International Compressor Engineering Conference at Purdue.
  • Date d'édition : 05/2021
  • Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.

Liens


Voir d'autres communications du même compte rendu (62)
Voir le compte rendu de la conférence

Indexation