Document IIF

Application des matériaux à changement de phase (PCM) aux systèmes à accumulation thermique d'eau tiède sous pression.

Application of phase change materials (PCM) in thermal storage systems for pressurised lukewarm water.

Numéro : pap. n. 316

Auteurs : HOFF M. van der, VERBEEK J., JOLING A., et al.


The majority of HVAC systems contain a (cylindrical) tank for small thermal buffer purposes. By sensible heat merits of water a thermal storage function is achieved. In spite of the high specific heat of water, tanks never tend to become large so that storage capacity is limited. Only Ice buffer systems have become popular for short term latent thermal storage, where storage (by phase change of water to ice vice verso) is created at 273 K. Phase Change Materials (PCM) have been under wide investigation in the last decades due to their excessive and extraordinary thermal storage capabilities. Nevertheless, application in closed water circuit systems has not yet been applied widely at all. This paper describes practical test work on a ready to use compound Phase Change Material storage product, intended for closed loop pressurized water storage systems at positive Celsius temperatures. The PCM is encapsulated in easy to install round tubes. Tests were carried out on small DeltaT water inlet-to -PCM latent temperature differences in order to measure the behavior and to verify the applicability of PCM for short term thermal storage systems, both for very quick loading and unloading patterns. The PCM used is based on an eutectic salt hydrate, with additives for reassuring long term stability and increase of thermal conductivity.

Documents disponibles

Format PDF

Pages : 7 p.


  • Prix public

    20 €

  • Prix membre*


* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)


  • Titre original : Application of phase change materials (PCM) in thermal storage systems for pressurised lukewarm water.
  • Identifiant de la fiche : 30004694
  • Langues : Anglais
  • Source : 10th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2012). Proceedings. Delft, The Netherlands, June 25-27, 2012.
  • Date d'édition : 25/06/2012


Voir d'autres communications du même compte rendu (142)
Voir le compte rendu de la conférence