Avantages et inconvénients de l'utilisation des condenseurs à paroi chaude dans les réfrigérateurs domestiques.
Pros & cons of using hot-wall condensers in household refrigerators.
Numéro : pap. 2128
Auteurs : ESPÍNDOLA R., KNABBEN F. T., MELO C.
Résumé
This work focuses on the pros and cons of using hot-wall condensers in household refrigerators, based on both numerical and experimental approaches. To this end, seven refrigerators were manufactured with distinct designs of hot-wall condensers. The design parameters were the following: (i) adhesive tape (aluminum or polyethylene), (ii) tube outer diameter (4 or 4.76 m), (iii) total length (10 or 11.5 m) and (iv) lay-out. An in-house mathematical model for hot-wall condensers was added to an in-house system simulation tool to predict the refrigerators performance. Experiments were conducted in a climate-controlled test chamber. It was found that the model predictions are close to the energy consumption measurements with deviations of the order of ±10%. It has also been found that the heat load is increased by 7.7% when a hot-wall condenser is added to the system. An extensive sensitivity analysis was also carried out, showing that the hot-wall condenser and thus the refrigerator performance is very much affected by the outer sheet thermal conductivity and thickness, but mainly by the tape thermal conductivity. The contact area between tape and outer sheet also plays a significant role in the heat transfer, meaning that a cheaper polymeric tape might be used if enough contact area is provided. Additionally, it has been found that there is a tube pitch which minimizes the energy consumption in despite of the condenser geometry.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Pros & cons of using hot-wall condensers in household refrigerators.
- Identifiant de la fiche : 30024409
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 09/07/2018
Liens
Voir d'autres communications du même compte rendu (252)
Voir le compte rendu de la conférence
-
Theoretical and experimental evaluation of micr...
- Auteurs : RAMETTA R. S., BOENG J., MELO C.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
A numerical simulation model for plate-type, ro...
- Auteurs : HERMES C. J. L., MELO C., NEGRÃO C. O. R.
- Date : 03/2008
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 31 - n. 2
- Formats : PDF
Voir la fiche
-
Condenseurs à refroidissement électro-convectif...
- Auteurs : BABAKIN B. S., BOVKUN M. R.
- Date : 1993
- Langues : Russe
- Source : Kholodilnaya Tekhnika - n. 2
Voir la fiche
-
Thermal performance of skin-type, hot-wall cond...
- Auteurs : ESPINDOLA R. S., KNABBEN F. T., MELO C., et al.
- Date : 02/2020
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 110
- Formats : PDF
Voir la fiche
-
Improved airside modeling of heat exchangers fo...
- Auteurs : WIMMER K.
- Date : 10/07/2022
- Langues : Anglais
- Source : 2022 Purdue Conferences. 19th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche