Partager

Caractérisation mécanique des laminés de plastique renforcé de fibres de carbone sous des conditions variant d'une température ambiante à 4 K.

Mechanical characterization of CFRP woven laminates between room temperature and 4 K.

Auteurs : KUMAGAI S., SHINDO Y., HORIGUCHI K., et al.

Type d'article : Article

Résumé

This paper presents an evolution of the mechanical properties of T800H/3633 CFRP woven laminates for cryogenic tankage in RLV. Tensile and in-plane shear tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K). The tensile tests were conducted in accordance with ASTM D 3039 and JIS K 7073. Tensile strength and modulus were evaluated for both the warp and fill directions. A problem was encountered with obtaining acceptable failure of the specimens. The authors could not achieve failure in the test section. This problem was avoided by using dogbone shaped specimens. A two-dimensional finite element analysis was also used to study the stress distributions within the specimens and to interpret the experimental measurements. The in-plane shear modulus and shear strength were measured by tensile tests on the plus or minus 45° specimens (ASTM D 3518 and JIS K 7079). The effects of temperature on the stress-strain responses in tension and in-plane shear are examined. Fracture topography of specimens is also investigated and interpreted.

Détails

  • Titre original : Mechanical characterization of CFRP woven laminates between room temperature and 4 K.
  • Identifiant de la fiche : 2004-1961
  • Langues : Anglais
  • Source : JSME int. J., A - vol. 46 - n. 3
  • Date d'édition : 07/2003
  • Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.

Liens


Voir la source

Indexation