Partager

Caractéristiques de l'écoulement thermique des faisceaux de nouveaux tubes plats à ailettes ondulées dans les condenseurs refroidis à l'air.

Thermal-flow characteristics of the new wave-finned flat tube bundles in air-cooled condensers.

Auteurs : YANG L., TAN H., DU X., et al.

Type d'article : Article

Résumé

The wave-finned flat tube heat exchangers are widely used in air-cooled condensers of a power plant. Due to the oblique arrangement of the wavy fins on the A-frame tube bundles of the air-cooled condenser, the finned tube is prone to fouling thus the thermo-flow performances of air-cooled condensers are likely to become deteriorated. A new configuration of wave-finned flat tube, in which the fin surface rotates to be perpendicular, is proposed in this paper to prevent the fouling from gathering on the finned tube. The physical and mathematical models for the fluid and heat flows of the cooling air through the present and proposed wave-finned flat tube bundles are setup, and the thermoflow characteristics are compared. For the proposed finned tube, the influences of the fin pitch, height and the Reynolds number on the flow and heat transfer performances are investigated, and the correlations of the friction factor and Nusselt number are recommended. The results show that the buoyancy effect should be taken into account for the correlation of the friction factor at low Reynolds numbers, but this buoyancy force can be ignored for the Nusselt number.

Détails

  • Titre original : Thermal-flow characteristics of the new wave-finned flat tube bundles in air-cooled condensers.
  • Identifiant de la fiche : 30006241
  • Langues : Anglais
  • Source : International Journal of thermal Sciences - vol. 53
  • Date d'édition : 03/2012
  • DOI : http://dx.doi.org/10.1016/j.ijthermalsci.2011.11.002

Liens


Voir d'autres articles du même numéro (4)
Voir la source

Indexation