Document IIF
Caractéristiques de transfert de chaleur et de chute de pression de la circulation d’air humide dans des mousses métalliques de différentes structures et mouillabilité de surface en conditions de déshumidification.
Heat transfer and pressure drop characteristics of wet air flow in metal foams with different structures and surface wettability during dehumidifying conditions.
Résumé
To optimize the metal foam heat exchangers under dehumidifying conditions, the heat transfer coefficient (HTC) and pressure drop of wet air in metal foams with different structure and surface wettability were obtained experimentally. The pore density of tested metal foams is 5-40 PPI, and the porosity is 0.85-0.95. The wettability includes the hydrophobic, hydrophilic and uncoated surface, with proceeding contact angles from 15.4° to 161.2°. The results show that, the HTC of wet air in metal foams are enhanced by 4%-33% and 2-21% by hydrophobic and hydrophilic coating, respectively; the pressure drops are obviously increased by hydrophobic coating and maximumly decreased by 20% by hydrophilic coating; as PPI increases, the pressure drop in metal foams are increased, while the HTC is firstly increased then decreased at most dehumidifying conditions; as porosity increases, the HTC and pressure drop are both decreased. Considering the comprehensive performance, 20PPI is the best metal foam pore density with best comprehensive performance, while 0.85 and 0.95 are the best porosity for hydrophobic and uncoated metal foams, respectively.
Documents disponibles
Format PDF
Pages : 8
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Heat transfer and pressure drop characteristics of wet air flow in metal foams with different structures and surface wettability during dehumidifying conditions.
- Identifiant de la fiche : 30026023
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Date d'édition : 24/08/2019
- DOI : http://dx.doi.org/10.18462/iir.icr.2019.0702
Liens
Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence
-
Influence of pore density and porosity on the w...
- Auteurs : LAI Z., HU H., DING G., et al.
- Date : 04/2018
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 88
- Formats : PDF
Voir la fiche
-
Droplet shedding characteristics on metal fiber...
- Auteurs : HU H., LAI Z., HU C.
- Date : 10/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 130
- Formats : PDF
Voir la fiche
-
Effect of LiCl solution properties on film wett...
- Auteurs : LYU Y., YIN Y.
- Date : 07/08/2017
- Langues : Anglais
- Source : International sorption heat pump conference, ISHPC 2017, Tokyo august 7-10.
Voir la fiche
-
Adsorption and desorption isotherms of desiccan...
- Auteurs : NAWAZ K., SCHMIDT S. J., JACOBI A.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Experimental study of boiling heat transfer cha...
- Auteurs : XIA G., WANG Y., LI R., YAN Z., LI Q.
- Date : 07/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 151
- Formats : PDF
Voir la fiche