Document IIF

Comparaison d’un évaporateur noyé classique avec une évaporation d’ammoniac à détente sèche côté calandre sur un faisceau de tubes plats.

Comparison of a conventional flooded evaporator with a shell side direct expansion evaporation of ammonia on a plain tube bundle.

Numéro : pap. n. 1470

Auteurs : ABBAS A., AYUB Z., AYUB A., et al.

Résumé

Shell and tube heat exchangers are widely used in various industrial refrigeration systems. With recent global warming and ozone depletion concerns it is crucial to develop low charge refrigeration systems with environment friendly natural refrigerants such as ammonia. This paper presents a comparative analysis between a conventional shell and tube flooded evaporator and a low charged direct expansion evaporator with ammonia evaporating on shell side of a triangular pitch plain tube bundle. The saturation temperature was varied between -1.7?C and -20?C with heat flux range of 5 to 45 kW/m2. The degree of superheat for direct expansion case was varied from 2 to 10 K. The heat transfer coefficient was observed to increase with an increase in saturation temperature and heat flux for both flooded and direct expansion case, while for direct expansion case heat transfer coefficient was observed to decrease with an increase in the degree of exit superheat.

Documents disponibles

Format PDF

Pages : 8

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Comparison of a conventional flooded evaporator with a shell side direct expansion evaporation of ammonia on a plain tube bundle.
  • Identifiant de la fiche : 30026117
  • Langues : Anglais
  • Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
  • Date d'édition : 24/08/2019
  • DOI : http://dx.doi.org/10.18462/iir.icr.2019.1470

Liens


Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence