Partager

Document IIF

Condensation du R404A en écoulement forcé dans des tubes horizontaux lisses, à micro-ailettes et à rainures croisées.

R404A condensing under forced flow conditions inside smooth, microfin and cross-hatched horizontal tubes.

Auteurs : INFANTE FERREIRA C. A., NAN X., NEWELL T. A., et al.

Résumé

Experimental parameters include a lubricating polyol ester oil concentration varied from 0 to 4%. The test runs were done at average inlet saturated condensing temperatures of 40 °C. The inlet vapour was kept at saturation (quality= 1.0). The mass fluxes were between 200 and 600 kg/m2s, and the heat fluxes, selected to obtain a quality of 0.0 at the outlet of the test section, varied from 5 to 45 W/m2. The heat transfer enhancement factor varied between 1.8 and 2.4 for both microfin and cross-hatched tubes. Enhancement factors increased as oil concentrations increased up to 2%. For higher oil concentrations, the enhancement decreased. Pressure drop in the test section increased by approximately 25% as the oil concentration increased from 0 to 4%. The results from the experiments are compared with those calculated from correlations reported in the literature. Modified correlations are proposed.

Documents disponibles

Format PDF

Pages : 2001-5

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : R404A condensing under forced flow conditions inside smooth, microfin and cross-hatched horizontal tubes.
  • Identifiant de la fiche : 2003-0674
  • Langues : Anglais
  • Source : Thermophysical Properties and Transfer Processes of New Refrigerants.
  • Date d'édition : 03/10/2001

Liens


Voir d'autres communications du même compte rendu (60)
Voir le compte rendu de la conférence

Indexation