Partager

Développement d’un système de cryorefroidisseur compact pour un filtre supraconducteur à haute température.

Development of a compact cryocooler system for high temperature superconductor filter application.

Auteurs : PANG X., WANG X., ZHU J., et al.

Type d'article : Article

Résumé

Seeking a higher specific power of the pulse tube cryocooler is an important trend in recent studies. High frequency operation (100 Hz and higher), combined with co-axial configuration, serve as a good option to meet this requirement. This paper introduces a high efficiency co-axial pulse tube cryocooler operating at around 100 Hz. The whole system weighs 4.3 kg (not including the radiator) with a nominal input power of 320 W, namely, power density of the system is around 74 W/kg. The envelop dimensions of the cold
finger itself is about 84 mm in length and 23 mm in outer diameter. Firstly, numerical model for designing the system and some simulation results are briefly introduced. Distributions of pressure wave, the phase difference between the pressure wave and the volume flow rate and different energy flow are presented for a better understanding of the system. After this, some of the characterizing experimental results are presented. At an optimum working point, the cooling power at 80 K reaches 16W with an
input electric power of 300 W, which leads to an efficiency of 15.5% of Carnot.

Détails

  • Titre original : Development of a compact cryocooler system for high temperature superconductor filter application.
  • Identifiant de la fiche : 30020903
  • Langues : Anglais
  • Source : Cryogenics - vol. 80
  • Date d'édition : 06/2016
  • DOI : http://dx.doi.org/10.1016/j.cryogenics.2016.06.004

Liens


Voir d'autres articles du même numéro (31)
Voir la source

Indexation