Partager

Document IIF

Ébullition en écoulement du R1234ze(E) à l'intérieur d'un tube à micro-ailettes de 3,4 mm de diamètre intérieur.

R1234ze(E) flow boiling inside a 3.4 mm ID microfin tube.

Auteurs : DIANI A., MANCIN S., ROSSETTO L.

Type d'article : Article, Article de la RIF

Résumé

R1234ze(E) has a GWP<1 and a normal boiling temperature approximately 7.3°C lower than that of R134a; it represents an interesting candidate for its replacement as working fluid in refrigerating machines. The refrigerant charge minimization in refrigerating and air conditioning equipment is a key issue for the new environmental challenges. Mini microfin tubes represent an optimal solution for both heat transfer enhancement and charge minimization tasks. This paper presents an experimental study of R1234ze(E) flow boiling inside a mini microfin tube with internal diameter at the fin tip of 3.4 mm. The experimental measurements were carried out at constant saturation temperature of 30°C, by varying the refrigerant mass velocity between 190 kg m-2 s-1 and 940 kg m-2 s-1, the vapour quality from 0.2 to 0.99 at three different heat fluxes: 10, 25, and 50 kW m-2. The experimental results are then compared with those obtained for the more traditional R134a.

Documents disponibles

Format PDF

Pages : 105-119

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : R1234ze(E) flow boiling inside a 3.4 mm ID microfin tube.
  • Identifiant de la fiche : 30012498
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 47
  • Date d'édition : 11/2014

Liens


Voir d'autres articles du même numéro (14)
Voir la source

Indexation