Document IIF

Ébullition en écoulement du R133zd(E) à l’intérieur d’un tube à micro-ailettes de 4,3mm de diamètre intérieur.

R133zd(E) flow boiling inside a 4.3mm ID microfin tube.

Numéro : pap. TP-0023

Auteurs : LONGO G. A., MANCIN S., RIGHETTI G., et al.


This paper explores the heat transfer and fluid flow characteristics of a new low-GWP refrigerant R1233zd(E) during flow boiling inside a mini microfin tube with internal diameter at the fin tip of 4.3 mm. The microfin tube is brazed inside a copper plate, electrically heated from the bottom. Several T-type thermocouples are inserted in the wall to measure the temperature distribution during the phase change process. In particular, the experimental measurements were carried out at constant mean saturation temperature of 30°C, by varying the refrigerant mass velocity between 100 kg m-2 s-1 and 300 kg m-2 s-1, the vapor quality from 0.2 to 0.95, at four different heat fluxes: 15, 30, 60, and 90 kW m-2. The experimental results are presented in terms of the two-phase
heat transfer coefficient, onset of dryout vapor quality, and frictional pressure drop as a function of the operating test conditions.

Documents disponibles

Format PDF

Pages : 8


  • Prix public

    20 €

  • Prix membre*


* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)


  • Titre original : R133zd(E) flow boiling inside a 4.3mm ID microfin tube.
  • Identifiant de la fiche : 30021527
  • Langues : Anglais
  • Source : 5th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants.
  • Date d'édition : 23/04/2017
  • DOI :


Voir d'autres communications du même compte rendu (84)
Voir le compte rendu de la conférence