Document IIF
Effet d'un additif sur la condensation du R123 à la surface d'un tube aileté vertical.
The effect of a boiling additive on R123 condensation on a vertical integral-fin surface.
Auteurs : KEDZIERSKI M. A.
Type d'article : Article, Article de la RIF
Résumé
This paper examines the effect of the addition of 0.5% mass isopentane to R123 on the vapor-space condensation heat transfer of R123. In a previous study, the pool boiling performance of R123 was improved by adding 0.5% mass isopentane. Consequently, the impetus of the present study was a desire to quantify the consequence of the boiling additive on the condensation heat transfer performance of pure R123. In this way, the net effect of the additive on the cycle performance of pure R123 can be estimated. The data consisted of the heat flux and the wall temperature difference measurements for pure R123 and R123/isopentane (99.5/0.5) on an integral-trapezoidal-fin surface. The temperature of the saturated vapor was held constant at 313.15 K for all the tests. On average, the R123/isopentane mixture exhibited a 4% smaller heat flux than that of pure R123. Presumably, the degradation was caused by the zeotropic behavior of the mixture, which led to a loss of available driving temperature difference for haet transfer across the liquid film. Considering that the boiling performance was enhanced on average by 10% with the addition of 0.5% mass isopentane, isopentane may still be a viable means of improving the cycle performance of R123 despite the 4% condensation heat transfer degradation.
Documents disponibles
Format PDF
Pages : 101-111
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : The effect of a boiling additive on R123 condensation on a vertical integral-fin surface.
- Identifiant de la fiche : 2000-2458
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 23 - n. 2
- Date d'édition : 03/2000
Liens
Voir d'autres articles du même numéro (5)
Voir la source
Indexation
-
Thèmes :
HCFC;
Transfert de masse - Mots-clés : Coefficient de transfert de chaleur; Tube ailette; Transfert de masse; Transfert de chaleur; R123; Surface; Frigorigène; Condensation; Additif
-
A theoretical investigation of condensation of ...
- Auteurs : STEGOUSAGIA A., BRIGGS A., ROSE J. W.
- Date : 21/09/1994
- Langues : Anglais
- Source : CFCs, the Day After.
- Formats : PDF
Voir la fiche
-
The effect of noncondensable gas on the condens...
- Auteurs : REWERTS L. E., HUBER J. B., PATE M. B.
- Date : 1997
- Langues : Anglais
- Source : ASHRAE Transactions.
Voir la fiche
-
A simple heat-transfer model for condensation o...
- Auteurs : ROSE J. W.
- Date : 06/12/1993
- Langues : Anglais
- Source : Proceedings of international seminar on heat transfer, thermophysical properties and cycle performance of alternative refrigerants.
Voir la fiche
-
Boiling of R134a and R123 in a microfin tube.
- Auteurs : KATTAN N., THOME J. R., FAVRAT D.
- Date : 20/08/1995
- Langues : Anglais
- Source : For a Better Quality of Life. 19th International Congress of Refrigeration.
- Formats : PDF
Voir la fiche
-
POOL BOILING DATA FOR FIVE REFRIGERANTS ON THRE...
- Auteurs : WEBB R. L., PAIS C.
- Date : 1991
- Langues : Anglais
Voir la fiche