Effets de la courbure en équerre sur la chute de pression et la configuration de l'écoulement dans des canaux microfluidiques.
Effects of miter bend on pressure drop and flow structure in micro-fluidic channels.
Auteurs : XIONG R., CHUNG J. N.
Type d'article : Article
Résumé
The characteristics of a pressure-driven water flow including flow micro-structures and pressure drops are investigated in serpentine micro-channels with miter bends. The micro-channels have rectangular cross-sections with hydraulic diameters of 0.209, 0.412 and 0.622 mm, respectively. To segregate the bends and entrance effects individually from the total pressure drop, for each size three types of micro-channels: straight short, straight long and long serpentine, were fabricated to get the reliable pressure data without entrance effect. A micron-resolution particle image velocimetry system (micro-PIV) was develop and used to obtain the detailed velocity vector field. The experimental results show that the vortices around the outer and inner walls of the bend do not form when Re < 100. Those vortices appear and continue to develop with increasing Re number when Re is larger than a value around 100, and the shape and size of the vortices almost remain constant when the Re is larger than a value around 1000. The experimentally observed additional pressure drop due to the bend is commensurate with the strength of the calculated vortices. The bend loss coefficient K(b) was observed to be related only with the Re number when Re < 100, but with the Re number and channel size when Re > 100. It almost keeps constant and changes in the range of plus or minus 10% when the Re is larger than a threshold value somewhere in 1000-1500. [Reprinted with permission from Elsevier. Copyright, 2007].
Détails
- Titre original : Effects of miter bend on pressure drop and flow structure in micro-fluidic channels.
- Identifiant de la fiche : 2008-2052
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 51 - n. 11-12
- Date d'édition : 06/2008
Liens
Voir d'autres articles du même numéro (6)
Voir la source
Indexation
- Thèmes : Transfert de chaleur
- Mots-clés : Géometrie; Calcul; Microcanal; Modélisation; Écoulement; Échangeur de chaleur; Eau; Chute de pression
-
A generalized effectiveness-NTU based variable ...
- Auteurs : HUANG L., AUTE V., RADERMACHER R.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Modyfikacja metody Lockharta-Martinelli'ego obl...
- Auteurs : DUTKOWSKI K., CHARUN H.
- Date : 07/2008
- Langues : Polonais
- Source : Chlodnictwo - vol. 43 - n. 7
Voir la fiche
-
Pressure drop of water flow in rectangular micr...
- Auteurs : SOBIERSKA E., CHMIEL K., KULENOVIC R., et al.
- Date : 02/08/2005
- Langues : Anglais
- Source : Commercial Refrigeration. Thermophysical Properties and Transfer Processes of Refrigerants. Proceedings of the IIR International Conferences.
- Formats : PDF
Voir la fiche
-
Modyfikacja metody Lockharta-Martinelli'ego obl...
- Auteurs : DUTKOWSKI K., CHARUN H.
- Date : 11/2008
- Langues : Polonais
- Source : Chlodnictwo - vol. 43 - n. 11
Voir la fiche
-
A mass flow based generalized microchannel heat...
- Auteurs : HUANG L., AUTE V., RADERMACHER R.
- Date : 25/06/2012
- Langues : Anglais
- Source : 10th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2012). Proceedings. Delft, The Netherlands, June 25-27, 2012.
- Formats : PDF
Voir la fiche