Document IIF
Étude de l’association d’un détendeur rotatif à palettes et d’un détendeur électronique dans un système frigorifique.
Investigation of combination of a rotary vane expander and an expansion valve in a refrigeration system.
Numéro : pap. n. 167
Auteurs : THAKUR R., MURTHY A. A., SUBIANTORO A.
Résumé
Throttling loss is a major source of inefficiencies in a typical refrigeration system. Expanders have been proposed and studied to recover the expansion work previously. In this study, a four-vane rotary expander is developed and will be tested in an R22 refrigeration system. The expander will be installed in combination with an expansion valve to allow for refrigerant flow adjustments. Preliminary experiments were carried out using compressed air as the working fluid to study the expander. The experiments show that the maximum isentropic efficiency was 19% at 561 rpm, the maximum volumetric efficiency was 30% at 1264 rpm and the maximum mechanical efficiency was 7% at 561 rpm. A simulation model was also developed to observe the COP improvements in the modified R22 refrigeration system. The simulation results show that the COP improvements were 2.5-6% and 3.58.5% on the heating and cooling sides, in comparison with the benchmark system without an expander.
Documents disponibles
Format PDF
Pages : 8
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Investigation of combination of a rotary vane expander and an expansion valve in a refrigeration system.
- Identifiant de la fiche : 30025960
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Date d'édition : 24/08/2019
- DOI : http://dx.doi.org/10.18462/iir.icr.2019.0167
Liens
Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
HCFC;
Systèmes de détente - Mots-clés : Conception; Rotor; Rendement volumetrique; Récupération; R22; Prototype; Performance; Essai; Détendeur à palettes
-
Practical Design Procedure of a Rotary Vane Exp...
- Auteurs : HUANG P. X., YONKERS S., GROLL E. A.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Analytical grid generation for sliding vane mac...
- Auteurs : YE F., BIANCHI G., TASSOU S. A., DENG J.
- Date : 09/2021
- Langues : Anglais
- Source : 12th International Conference on Compressors and their Systems
- Formats : PDF
Voir la fiche
-
Experimental investigation on a sliding-vane ex...
- Auteurs : COSTANZO I., MURGIA S., VALENTI G., FASANI F.
- Date : 09/2021
- Langues : Anglais
- Source : 12th International Conference on Compressors and their Systems
- Formats : PDF
Voir la fiche
-
Effects of lubricating oil on the performance o...
- Auteurs : MURTHY A. A., NORRIS S., SUBIANTORO A.
- Date : 09/2021
- Langues : Anglais
- Source : 12th International Conference on Compressors and their Systems
- Formats : PDF
Voir la fiche
-
Investigation of the centrifugal force effect t...
- Auteurs : SUBIANTORO A., OOI K. T.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 21st International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche