Document IIF
Étude de la distribution non uniforme de la pression interne d'un compresseur frigorifique à double vis.
Study on non-uniform internal pressure distribution of twin-screw refrigeration compressor.
Résumé
To achieve higher efficiency of twin-screw compressors for refrigeration, the non-uniform internal pressure distribution in the rotor chamber and the flat section in the p-θ diagram were investigated in this paper. A three-dimensional CFD model of a twin-screw refrigeration compressor for chillers was established to analyze the generating mechanism of the flat section in the p-θ diagram. The p-θ diagrams of the compressor were compared under different rotational speeds and working fluids. Analysis results showed that the flat section in the p-θ diagram is caused by the periodic pressure wave propagation and reflection along the working chamber, and the pressure along the chamber is non-uniform when the sound speed is relatively slow compared with the chamber length in one compression cycle. A dimensionless ratio of chamber length and pressure wave travel distance is proposed to estimate the pressure distribution in the working chamber, based on which the flat section is prone to appear in large-scale compressors with low sound speed refrigerants like R134a. Some improvement directions were put forward to avoid efficiency losses, i.e., appropriately delaying the suction end angle and modifying the discharge port to match the pressure distribution.
Documents disponibles
Format PDF
Pages : 214-222
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Study on non-uniform internal pressure distribution of twin-screw refrigeration compressor.
- Identifiant de la fiche : 30031933
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 152
- Date d'édition : 08/2023
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2023.04.017
Liens
Voir d'autres articles du même numéro (34)
Voir la source
Indexation
- Thèmes : Compresseurs
- Mots-clés : Compresseur à vis; Pression; Onde; Rendement; Modélisation
-
A semi-empirical method for assessing the perfo...
- Auteurs : GIUFFRIDA A.
- Date : 25/01/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 93
Voir la fiche
-
Groupes avec compresseurs à vis modernes pour l...
- Auteurs : HARTMANN K.
- Date : 03/1992
- Langues : Allemand
- Source : Klima Kälte Heiz. - vol. 20 - n. 3
Voir la fiche
-
Dernières tendances technologiques des compress...
- Auteurs : TOJO K.
- Date : 12/2012
- Langues : Japonais
- Source : Refrigeration - vol. 087 - n. 1022
Voir la fiche
-
PERTES VOLUMETRIQUES DANS UN COMPRESSEUR FRIGOR...
- Auteurs : PEKAREV V. I.
- Date : 1991
- Langues : Russe
- Source : Kholodilnaya Tekhnika - n. 6
Voir la fiche
-
Monoscrew: a newly developed refrigerating comp...
- Auteurs : MALE J. van
- Date : 11/1978
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 1 - n. 4
- Formats : PDF
Voir la fiche