Document IIF
Etude de la performance d'une pompe à chaleur à température élevée employant des cycles parallèles avec chauffage en série du côté eau.
Investigation of the performance of a high-temperature heat pump using parallel cycles with serial heating on the water side.
Résumé
High-temperature heat pumps can be widely utilized for industrial heating as an energy-saving method due to their high condensing temperatures. This paper describes a cycle analysis and experimental study on the performance of a high-temperature heat pump (HTHP) system. The performance comparisons are conducted using performance calculations among the parallel cycles with serial heating on the water side, a two-stage compression cycle and a single-stage cycle. The results show that the performance of the heat pump using parallel cycles with serial heating is the best when the condensing temperature exceeds 75°C. Based on the cycle analysis, a prototype HTHP using parallel cycles with serial heating on the water side with a heating capacity of 700 kW was built in this study. Also, a screw compressor was modified due to the high-temperature conditions. The measured performance shows that the HTHP can stably provide an outlet water temperature of up to 85°C with a high COP. The experimental results indicate that the average heating capacity and coefficient of performance of the HTHP could be improved significantly in high-temperature conditions due to the parallel cycles with serial heating on the water side and the modified compressor. All the results indicate that the HTHP using parallel cycles and modified compressor with serial heating on the water side is very competitive in industrial heating applications.
Documents disponibles
Format PDF
Pages : pp. 1142-1151
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Investigation of the performance of a high-temperature heat pump using parallel cycles with serial heating on the water side.
- Identifiant de la fiche : 2010-0938
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 33 - n. 6
- Date d'édition : 09/2010
Liens
Voir d'autres articles du même numéro (14)
Voir la source
Indexation
-
Thèmes :
Techniques des pompes à chaleur;
Compresseurs - Mots-clés : Calcul; Mesure; Conception; Pompe à chaleur; Performance; Injection; Huile; Haute température; Essai; Cycle thermodynamique; Compresseur à vis
-
Investigation of R-744 Voorhees transcritical h...
- Auteurs : ZHA S., HAFNER A., NEKSA P.
- Date : 01/2008
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 31 - n. 1
- Formats : PDF
Voir la fiche
-
LA POMPE A CHALEUR A HAUTE TEMPERATURE.
- Auteurs : EZAKI T., MATSUDA J., KAWABE A.
- Date : 1985
- Langues : Japonais
- Source : Refrigeration - vol. 60 - n. 694
Voir la fiche
-
Oil flooded compression in vapour compression h...
- Auteurs : HUGENROTH J., BRAUN J., GROLL E., et al.
- Date : 16/02/2006
- Langues : Anglais
- Source : Innovative Equipment and Systems for Comfort and Food Preservation.
- Formats : PDF
Voir la fiche
-
EXPERIMENTAL DEVELOPMENT OF A HIGH-TEMPERATURE ...
- Auteurs : MEYER-PITTROFF R., HACKENSELLNER T.
- Date : 12/03/1990
- Langues : Anglais
Voir la fiche
-
Optimization analysis on the performance of a v...
- Auteurs : LIU S., LU Y., WU Y., et al.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche