Étude des effets des paramètres des palettes sur les performances de séparation dans un séparateur cyclonique à écoulement axial.

Study on the effects of vane parameters on separation performance in an axial flow cyclone separator.

Numéro : pap. 2451

Auteurs : ZHANG Y., CHEN W., LIU B., et al.

Résumé

The oil-gas cyclone separator is a key component of an oil injection compressor system for its advantages of small volume, simple structure, high separation efficiency and low pressure loss. This paper presents the investigation on the new type of axial flow cyclone separator performance under different structural parameters, including the angle of vanes, the number of vanes, the rotation angle of single vane, by numerical simulation and verification experiments. A numerical model of two-phase flow in the cyclone separator was established and the separation efficiency and pressure loss of cyclone separators were simulated. A test rig was built up and the diameter distributions of droplets at the inlet and outlet of separator were measured by a Malvern laser particle size analyzer to verify the simulation model. The results showed that the separation efficiency and pressure loss can be improved with the increase of the rotation angle of vanes; with the decrease of the outlet angle of the first stage vane and the increase of the number of vanes, the critical separated droplet diameter of separator can be lowered effectively. The results also showed that the optimum outlet angle of vanes is 22°~25° considering the separation efficiency and the pressure loss of separators.

Documents disponibles

Format PDF

Pages : 10

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Study on the effects of vane parameters on separation performance in an axial flow cyclone separator.
  • Identifiant de la fiche : 30024560
  • Langues : Anglais
  • Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
  • Date d'édition : 09/07/2018

Liens


Voir d'autres communications du même compte rendu (130)
Voir le compte rendu de la conférence