Etude expérimentale d'un absorbeur à bulles à ammoniac-eau utilisant un échangeur à plaques pour des systèmes frigorifiques à absorption.
Experimental study of an ammonia-water bubble absorber using a plate heat exchanger for absorption refrigeration machines.
Auteurs : CEREZO J., BOUROUIS M., VALLES M., et al.
Type d'article : Article
Résumé
The development of absorption chillers activated by renewable heat sources has increased due mainly to the increase in primary energy consumption that causes problems such as greenhouse gases and air pollution among others. These machines, which could be a good substitute for compression systems, could be used in the residential and food sectors which require a great variety of refrigeration conditions. Nevertheless, the low efficiency of these machines makes it necessary to enhance heat and mass transfer processes in the critical components, mainly the absorber, in order to reduce their large size. This study used ammonia-water as the working fluid to look at how absorption takes place in a plate heat exchanger operating under typical conditions of absorption chillers, driven by low temperature heat sources. Experiments were carried out using a corrugated plate heat exchanger model NB51, with three channels, where ammonia vapour was injected in bubble mode into the solution in the central channel. In addition, the effect of the absorber operating conditions on the most significant efficiency parameters was analyzed. The increase in pressure, solution and cooling flow rates positively affect the absorber performance, on the other hand an increase in the concentration, cooling, and solution temperature negatively affects the absorber performance. [Reprinted with permission from Elsevier. Copyright, 2008].
Détails
- Titre original : Experimental study of an ammonia-water bubble absorber using a plate heat exchanger for absorption refrigeration machines.
- Identifiant de la fiche : 2009-0595
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 29 - n. 1
- Date d'édition : 01/2009
Liens
Voir d'autres articles du même numéro (4)
Voir la source
Indexation
-
Experimental study of plate-type absorber for i...
- Auteurs : GAO H., TOMINAGA Y., FUKUNAGA S., et al.
- Date : 04/12/2002
- Langues : Anglais
- Source : Green breeze from Asia: frontiers of refrigerants, heat transfer and system.. ACRA-2002. Proceedings of the Asian conference on refrigeration and air conditioning.
Voir la fiche
-
Ammonia-water bubble absorber with a plate heat...
- Auteurs : KANG Y. T., CHRISTENSEN R. N., KASHIWAGI T.
- Date : 1998
- Langues : Anglais
- Source : ASHRAE Transactions. 1998 Winter Meeting, San Francisco, CA.
Voir la fiche
-
Performance analysis of a plate type heat excha...
- Auteurs : NORDTVEDT S. R.
- Date : 24/09/2002
- Langues : Anglais
- Source : Proceedings of the International Sorption Heat Pump Conference.
Voir la fiche
-
Flow boiling heat transfer of ammonia/water mix...
- Auteurs : TÁBOAS F., VALLÈS M., BOUROUIS M., et al.
- Date : 06/2010
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 33 - n. 4
- Formats : PDF
Voir la fiche
-
Development of vertical plate type absorbers.
- Auteurs : NISHIMURA N., NOMURA T., IYOTA H., et al.
- Date : 24/09/2002
- Langues : Anglais
- Source : Proceedings of the International Sorption Heat Pump Conference.
Voir la fiche