Partager

Document IIF

Étude expérimentale d'un caloduc en boucle utilisant différents matériaux de travail servant de mèches.

Experimental investigation on a loop heat pipe using different working wick materials.

Numéro : 1207

Auteurs : HTOO K. Z., HUYNH P. H., KARIYA K., MIYARA A.

Résumé

This article introduces characteristic of Loop Heat Pipe (LHP) with different wicks which were (i) sintered stainless-steel and (ii) ceramic. The experiment was carried out by using LHP with a flat-rectangular evaporator under the gravity-assisted conditions. Water was used as working fluid, and the performance of the LHP was analyzed in terms of temperatures at different locations of LHP and thermal resistance. As the results, a stable operation can be maintained in the range of 50 to 520 W for the LHP with the stainless-steel wick matching the desirable electronics’ limited temperature of 85°C at the heater surface at 350W (129.6 kW.m-2). The preliminary results for the LHP with ceramic wick showed that the heater surface temperature below 85°C could be obtained when operating at 54 W (20 kW.m-2).

Documents disponibles

Experimental Investigation on a Loop Heat Pipe Using Different Working Wick Materials

Pages : 6

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Experimental investigation on a loop heat pipe using different working wick materials.
  • Identifiant de la fiche : 30027915
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 14th IIR-Gustav Lorentzen Conference on Natural Refrigerants (GL2020). Proceedings. Kyoto, Japon, December 7-9th 2020.
  • Date d'édition : 07/12/2020
  • DOI : http://dx.doi.org/10.18462/iir.gl.2020.1207

Liens


Voir d'autres communications du même compte rendu (120)
Voir le compte rendu de la conférence

Indexation