Étude expérimentale de la performance d'un caloduc à pulsation pour une application de refroidissement d'une pile à combustible.
Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application.
Auteurs : CLEMENT J., WANG X.
Type d'article : Article
Résumé
A pulsating heat pipe (PHP) is a closed loop, passive heat transfer device. Its operation depends on the phase change of a working fluid within the loop. Design and performance testing of a pulsating heat pipe was conducted under conditions to simulate heat dissipation requirements of a proton exchange membrane (PEM) fuel cell stack. Integration of pulsating heat pipes within bipolar plates of the stack would eliminate the need for ancillary cooling equipment, thus also reducing parasitic losses and increasing energy output. The PHP under investigation, having dimensions of 46.80 cm long and 14.70 cm wide, was constructed from 0.3175 cm copper tube. Heat pipes effectiveness was found to be dependent upon several factors such as energy input, types of working fluid and its filling ratio. Power inputs to the evaporator side of the pulsating heat pipe varied from 80 to 180 W. Working fluids tested included acetone, methanol, and deionized water. Filling ratios between 30 and 70 percent of the total working volume were also examined. Methanol outperformed other fluids tested; with a 45 percent fluid fill ratio and a 120Wpower input, the apparatus took the shortest time to reach steady state and had one of the smallest steady state temperature differences. The various conditions studied were chosen to assess the heat pipe’s potential as cooling media for PEM fuel cells.
Détails
- Titre original : Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application.
- Identifiant de la fiche : 30006032
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 50 - n. 1
- Date d'édition : 01/2013
- DOI : http://dx.doi.org/10.1016/j.applthermaleng.2012.06.017
Liens
Voir d'autres articles du même numéro (64)
Voir la source
Indexation
-
Thèmes :
Transfert de chaleur;
Autres applications industrielles - Mots-clés : Propriété thermique; Pulsation; Caloduc; Chaleur; Méthanol; Refroidissement; Pile a combustible; Essai
-
Flat heat pipes for potential application in fu...
- Auteurs : VINICIO ORO M., BAZZO E.
- Date : 05/11/2015
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 90
Voir la fiche
-
Parametric study of an external coolant system ...
- Auteurs : REDDY E. H., MONDER D. S., JAYANTI S.
- Date : 01/2013
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 50 - n. 1
Voir la fiche
-
Comparison of different architectures for two-p...
- Auteurs : KOSCHEL P., BEDERNA B., SCHONHEIT M., RADDATZ M., BARTA R. B., THOMAS C.
- Date : 21/08/2023
- Langues : Anglais
- Source : Proceedings of the 26th IIR International Congress of Refrigeration: Paris , France, August 21-25, 2023.
- Formats : PDF
Voir la fiche
-
The efficiency analysis of DMFCs with different...
- Auteurs : LUO W. J., JIANG J. Y., LIN X. Q., et al.
- Date : 07/06/2010
- Langues : Anglais
- Source : ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
Voir la fiche
-
CFD study of liquid-cooled heat sinks with micr...
- Auteurs : RAMOS-ALVARADO B., LI P., LIU H., et al.
- Date : 10/2011
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 31 - n. 14-15
Voir la fiche