
Document IIF
Étude expérimentale des caractéristiques d’écoulement des régénérateurs en tenant compte de la variabilité des propriétés des fluides.
Experimental investigation on flow characteristics of regenerators considering variable fluid properties.
Résumé
A method was proposed to improve the accuracy of permeability and inertial resistance coefficient measurements for the flow characteristics of a regenerator, considering density and dynamic viscosity. Given the thickness of the porous medium at only 2 mm, and to simplify gradient data processing, the harmonic mean of the fluid density and dynamic viscosity was utilized. Various mesh counts of wire mesh and sintered powder filler were tested. The results showed that permeability decreased for both types of fillers as mesh count increased. Due to the high randomness inherent in the sintered powder, repeated tests were conducted, with errors being within 17 %. The inertial resistance coefficient fluctuated between 300 and 600 mesh counts, with a significant increase at 700 mesh. In contrast, the inertial resistance coefficient of the wire mesh increased consistently with the mesh count. The significant inertial resistance within the sintered powder was due to its irregularity, and a high positive correlation was observed between the regularity of the filler microstructure and the pressure drop across the regenerator. The flow characteristic correlations for two types of fillers were derived, applicable within the Reynolds number ranges of 6.54 to 99.17 for the wire mesh filler and 0.86 to 15.91 for the powder filler, with both exhibiting a goodness of fit exceeding 95 % being achieved.
Documents disponibles
Format PDF
Pages : 362-371
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Experimental investigation on flow characteristics of regenerators considering variable fluid properties.
- Identifiant de la fiche : 30033234
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 169
- Date d'édition : 01/2025
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2024.11.002
Liens
Voir d'autres articles du même numéro (33)
Voir la source
Indexation
- Thèmes : Transfert de masse
- Mots-clés : Régénérateur; Écoulement; Propriété physique; Experimentation
-
Effect of oscillatory frequency on heat transfe...
- Auteurs : LEONG K. C., JIN L. W.
- Date : 02/2006
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 49 - n. 3-4
Voir la fiche
-
Heat transfer characteristics of oscillating fl...
- Auteurs : CHEN Y., LUO E., DAI W.
- Date : 07/2009
- Langues : Anglais
- Source : Cryogenics - vol. 49 - n. 7
Voir la fiche
-
Numerical study on transverse asymmetry in the ...
- Auteurs : ANDERSEN S. K., DIETRICH M., CARLSEN H., et al.
- Date : 07/2007
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 50 - n. 13-14
Voir la fiche
-
Development of parallel wire regenerator for cr...
- Auteurs : NAM K., JEONG S. K.
- Date : 04/2006
- Langues : Anglais
- Source : Cryogenics - vol. 46 - n. 4
Voir la fiche
-
Application of a color change coating to evalua...
- Auteurs : CHE M., ELBEL S.
- Date : 05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 18th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche