Partager

Document IIF

Étude expérimentale et numérique de l’effet de la géométrie du tuyau de sortie du silencieux d’aspiration sur l’efficacité volumétrique et le COP.

Experimental and numerical investigation of suction muffler outlet pipe geometry effect on volumetric efficiency and COP.

Auteurs : SAHIN C., ONBASIOGLU S. U.

Type d'article : Article de la RIF

Résumé

This study investigates how the design of the muffler outlet pipe and the compressor speed affect the volumetric efficiency and COP using both experimental and numerical methods. Three distinct muffler outlet pipe designs, characterized by varying lengths and diameters, are tested across four different compressor speeds using R600a refrigerant. Experimental measurements include displacement data of the suction valve obtained via strain gauges, while pressure fluctuations in the suction plenum and cylinder volume are recorded using pressure transducers. Additionally, a magnetic encoder is employed to monitor crank angle and cylinder volume. A numerical model is developed using the GT-SUITE™ platform and subsequently validated against the experimental results. After successful validation, the numerical model is used to investigate the impacts of compressor speed and muffler geometry in more depth. The investigation encompasses the analysis of pressure drop, compressor speed, and valve timing in relation to mass flow rate and valve displacement curves. A general linear model is constructed to quantify the contribution of each parameter and the R-sq (adjusted) is 75 %. The model indicates that compressor speed accounts for 75 % of the variation in volumetric efficiency whereas the pipe diameter is the second-largest contributor, accounting for nearly 22 % and the effects of the pipe length is 3 %.

Documents disponibles

Format PDF

Pages : 309-319

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Experimental and numerical investigation of suction muffler outlet pipe geometry effect on volumetric efficiency and COP.
  • Identifiant de la fiche : 30033666
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 172
  • Date d'édition : 04/2025
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2025.02.001

Liens


Voir d'autres articles du même numéro (23)
Voir la source

Indexation