Partager

Étude numérique du transfert de chaleur et de l'écoulement fluide d'eau à travers un tube circulaire induit avec des inserts de bande.

Numerical investigation of heat transfer and fluid flow of water through a circular tube induced with divers' tape inserts.

Auteurs : ONI T. O., PAUL M. C.

Type d'article : Article

Résumé

An investigation was carried out to analyse numerically heat transfer and flow characteristics of water through a circular tube induced with different twisted tapes. The aim is to know which of the tube designs gives the best performance when compared with a plain tube. Turbulent flow was considered, the walls of the tubes were under uniform wall heat flux, Reynolds number was between 5000 and 20,000, and RNG ?-e model was selected for the simulations. The shape of cuts on the tapes has effects on the performance of the induced tubes. The tube fitted with alternate-axis triangular cut twisted tape has the best performance as its Nusselt number and friction factor are 1.63–2.18 and 2.60–3.15 times, respectively, that of the tube fitted with plain twisted tape while its thermal performance factor is 1.35–1.43 times that of the tube with plain twisted tape. New correlations were developed for the Nusselt number and friction factors, and reveal that the Nusselt number obtained from the new correlation agrees well with the correlation proposed by Thianpong et al. with a discrepancy of 2.21%. For the friction factor, the discrepancy is 3.01%.

Détails

  • Titre original : Numerical investigation of heat transfer and fluid flow of water through a circular tube induced with divers' tape inserts.
  • Identifiant de la fiche : 30017286
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 98
  • Date d'édition : 05/04/2016
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2015.12.039

Liens


Voir d'autres articles du même numéro (61)
Voir la source

Indexation