Etude numérique du transfert de chaleur et de masse dans un évaporateur à tube vertical avec analyse des trois zones.
Numerical investigation of the heat and mass transfer in a vertical tube evaporator with the three-zone analysis.
Auteurs : PARK I. S., KIM M. Y.
Type d'article : Article
Résumé
A numerical study for the flow, heat and mass transfer characteristics near the inflow region of the vertical evaporating tube with the films flowing down on both the inside and outside tube walls has been carried out. Condensation occurs along the outside wall and evaporation at the free surface of the inside film. The transport equations for momentum and energy are parabolized by the boundary-layer approximation and solved by using the marching technique. In this kind of numerical approach, the accurately predicting the early stage is really important because a small error at the previous step can produce the amplified big error at the next step. To accurately predict the flow at the inflow region of the vertical evaporating tube, the calculation domain of two film flow regions and tube wall is solved simultaneously. The interesting heat transfer characteristics revealed through this three-zone simulation, such as the evaporation delay and the temperature inflection at the very near inflow region are found and discussed along the discrepancy between the inner film inlet temperature and the saturation temperature. The case that the inner film comes in with the saturation temperature shows a good performance. The velocity and temperature fields as well as the amounts of the condensed and evaporated mass in both inner and outer films are predicted for the various conditions. [Reprinted with permission from Elsevier. Copyright, 2009].
Détails
- Titre original : Numerical investigation of the heat and mass transfer in a vertical tube evaporator with the three-zone analysis.
- Identifiant de la fiche : 2009-1463
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 52 - n. 11-12
- Date d'édition : 05/2009
Liens
- Liens externes :
Voir d'autres articles du même numéro (6)
Voir la source
Indexation
- Thèmes : Transfert de chaleur
- Mots-clés : Transfert de masse; Tube vertical; Transfert de chaleur; Simulation; Modélisation; Évaporateur; Échangeur de chaleur; Eau
-
A computational study of convection heat transf...
- Auteurs : HE S., JIANG P. X., XU Y. J., et al.
- Date : 06/2005
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 44 - n. 6
Voir la fiche
-
Concurrent turbulent mixed convection heat and ...
- Auteurs : FEDDAOUI M., MIR A., BELAHMIDI E.
- Date : 08/2003
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 46 - n. 18
Voir la fiche
-
Effect of humid air flow rate on the filmwise c...
- Auteurs : PELE C., BAUDOIN B., BARRAND J. P.
- Date : 09/1994
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 37 - n. 13
Voir la fiche
-
Two-dimensional freezing of water filled betwee...
- Auteurs : KIM C. J., RO S. T., LEE J. S., KIM M. G.
- Date : 07/1993
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 36 - n. 10
Voir la fiche
-
Simulation and experiment on the thermal perfor...
- Auteurs : LI X., CHEN Z., ZHAO J.
- Date : 10/2006
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 26 - n. 14-15
Voir la fiche