Partager

Document IIF

Étude numérique sur l’optimisation des géométries de la tuyère primaire d’un éjecteur.

Numerical study on optimization of ejector primary nozzle geometries.

Auteurs : WANG L., YAN J., WANG C., et al.

Type d'article : Article, Article de la RIF

Résumé

In an ejector refrigeration system (ERS), ejector acts as a compressor but without using any moving parts. To some extent, ejector performances are subjected to primary nozzle’s geometries with the action of shock waves. In this paper, CFD simulation was conducted to improve the ejector performance by varying the following ejector primary nozzle’s geometries and surface roughness: two angles of convergent and divergent portion, three lengths and surface roughness of throat, convergent and divergent portion.The CFD model was validated with the test results of an ERS experimental rig with working fluid of R134a. The optimum geometric parameters and surface roughness of the primary nozzle were obtained with the CFD analysis. The simulation results revealed that the throat and divergent portion of the primary nozzle should be paid more attention when designing ejector since the entrainment ratio of the ejector is rather sensitive to the length and surface roughness of these two portions.

Documents disponibles

Format PDF

Pages : 219-229

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Numerical study on optimization of ejector primary nozzle geometries.
  • Identifiant de la fiche : 30022234
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 76
  • Date d'édition : 04/2017
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2017.02.010

Liens


Voir d'autres articles du même numéro (33)
Voir la source

Indexation