Partager

Étude paramétrique des variables de fonctionnement et de conception sur la performance d'un absorbeur membranaire.

Parametric study of operating and design variables on the performance of a membrane-based absorber.

Auteurs : VENEGAS M., VEGA M. de, GARCIA-HERNANDO N.

Type d'article : Article

Résumé

A plate-and-frame microchannel H2O–LiBr absorber using a microporous membrane as contactor between the vapour and the solution is simulated. The heat and mass transfer equations, describing the absorption of the vapour phase into the solution, are solved for different membrane properties and for variable design and operating conditions. The parametric study evaluates the sensitivity of the ratio between the cooling capacity of the chiller and the absorber volume (rqV) to changes in the following parameters: width and height of the solution and cooling water channels; concentration, temperature and mass flow rate of the solution; temperature and mass flow rate of the cooling water; porosity, pore diameter, thickness and thermal conductivity of the membrane; thickness and thermal conductivity of the interface wall between the solution and the cooling water; and temperature, pressure and mass flow rate of the vapour. At the design stage of the membrane absorber, the parameters that can be optimised to maximise rqV are porosity, pore diameter, solution channels depth and membrane thickness. The thickness of the interface wall between the solution and the cooling water, as well as the solution channels width should be also taken into account. For a good performance during the operation of the absorber, special care should be taken to select the adequate vapour pressure and solution inlet temperature and concentration.

Détails

  • Titre original : Parametric study of operating and design variables on the performance of a membrane-based absorber.
  • Identifiant de la fiche : 30017303
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 98
  • Date d'édition : 05/04/2016
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2015.12.074

Liens


Voir d'autres articles du même numéro (61)
Voir la source

Indexation