Étude sur le comportement thermique et la performance en termes de refroidissement d'un puits thermique à microcanaux refroidi grâce à des nanofluides.
Study on the thermal behavior and cooling performance of a nanofluid-cooled microchannel heat sink.
Auteurs : CHEN C. H., DING C. Y.
Type d'article : Article
Résumé
This paper presents an analysis of the heat transfer characteristics and cooling performance of a microchannel heat sink with water–?Al2O3 nanofluids having different nanoparticle volume fraction. In view of the small dimensions of the microstructures, the microchannel heat sink is modeled as a fluid-saturated porous medium for problem solving. The Forchheimer–Brinkman–extended Darcy equation is used to describe the fluid flow and the two-equation model with thermal dispersion is utilized for heat transfer. Typical results for the temperature distributions of the fluid phase and the channel wall are presented for various values of nanoparticle volume fraction and the inertial force parameter. It is found that the temperature distribution of the channel wall is practically not sensitive to the inertial effect, while the fluid temperature distribution and the total thermal resistance change significantly due to the inertial force effect. In general, the effect of fluid inertia is to reduce the total thermal resistance and the temperature difference between the channel wall and the fluid phase. The total thermal resistances obtained from the present model with inertial effect match well with the existing experimental results, whereas the thermal resistance is overestimated as the inertial effect is neglected. [Reprinted with permission from Elsevier. Copyright, 2010].
Détails
- Titre original : Study on the thermal behavior and cooling performance of a nanofluid-cooled microchannel heat sink.
- Identifiant de la fiche : 30002649
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 50 - n. 3
- Date d'édition : 03/2011
- DOI : http://dx.doi.org/10.1016/j.ijthermalsci.2010.04.020
Liens
Voir d'autres articles du même numéro (2)
Voir la source
Indexation
-
Heat Transfer Characteristics of Conventional F...
- Auteurs : AL-ASADI M. T., MOHAMMED H. A., WILSON M. C. T.
- Date : 02/2022
- Langues : Anglais
- Source : Energies - vol. 15 - n. 3
- Formats : PDF
Voir la fiche
-
Optimization and comparison of double-layer and...
- Auteurs : SAKANOVA A., YIN S., ZHAO J., et al.
- Date : 04/2014
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 65 - n. 1-2
Voir la fiche
-
Étude expérimentale de la performance thermique...
- Auteurs : HAN X., TIAN Z., HE W., et al.
- Date : 12/2012
- Langues : Chinois
- Source : Journal of Refrigeration - vol. 33 - n. 148
- Formats : PDF
Voir la fiche
-
CFD study of liquid-cooled heat sinks with micr...
- Auteurs : RAMOS-ALVARADO B., LI P., LIU H., et al.
- Date : 10/2011
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 31 - n. 14-15
Voir la fiche
-
Cooling of electronic devices: Nanofluids contr...
- Auteurs : COLANGELO G., FAVALE E., MILANESE M., et al.
- Date : 25/12/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 127
Voir la fiche