Partager

Étude sur les performances d'un système de chauffe-eau à pompe à chaleur aérothermique avec des matériaux à changement de phase.

Investigation on system performance of air source heat pump water heater with phase change material.

Numéro : No 335

Auteurs : LIU Z., WANG T., GAO N., ZHAO H., GAO Y.

Résumé

In this paper, a series of experimental tests on air source heat pump water heater (ASHPWH) using a novel heat battery module with phase change material (PCM) were carried out. The melting temperature of PCM is 58°C. Meanwhile special attention has been paid to the optimization of heat transfer in heat battery module by means of computational fluid dynamics (CFD). The results indicate that the instant coefficient of performance (ICOP) of ASHP is up to 3.82 but the operation of ASHP is unstable and in poor condition with a 1.3 mm caliber electronic expansion valve. The latest experiment shows that using 1.5 mm caliber electronic expansion valve can not only make ASHP run more smoothly but also increase ICOP to 4.08. During the discharge process of heat battery module, 106.5L domestic water can be heated from 15°C to 40°C. The CFD simulation testifies copper fins applied in heat battery module can greatly enhanced the heat transfer coefficient compared with aluminum fins.

Documents disponibles

Format PDF

Pages : 9 p.

Disponible

Gratuit

Télécharger

Détails

  • Titre original : Investigation on system performance of air source heat pump water heater with phase change material.
  • Identifiant de la fiche : 30030106
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 13th IEA Heat Pump Conference 2021: Heat Pumps – Mission for the Green World. Conference proceedings [full papers]
  • Date d'édition : 31/08/2021

Liens


Voir d'autres communications du même compte rendu (198)
Voir le compte rendu de la conférence

Indexation