Résumé
This paper shows the impact of the external corrosion generated by SWAAT tests on the thermal performance of the aluminum heat exchangers. The SWAAT tests were designed to evaluate the durability of metallic materials, it could be further utilized to evaluate the effect of corrosion on the thermal and hydraulic performances. The accelerated corrosion test leaves a large amount of salt and corrosion products on the heat exchanger surface. These deposits do not usually occur in operating conditions (some fouling does), they could mislead the understanding of the real effect of corrosion on heat exchanger performance. This paper presents experiments with two identical brazed aluminum HXs being exposed to a series of salt spray corrosion tests (SWAAT): the airside pressure drop, the heat exchanger heat transfer characteristics, and the weight of the heat exchangers were examined periodically after the salt spray test. One heat exchanger is cleaned periodically to remove the deposit. The thermal performances are evaluated both before and after cleaning. The other heat exchanger is evaluated without cleaning and removal of the deposits. The uncleaned heat exchanger shows much worse performance than the cleaned heat exchanger: a significant increase in the airside pressure drop and weight, also a decrease of the heat transfer coefficient have been identified. Our experimental results show a linear trend of thermal performance degradation vs. corrosion testing time. Data also suggests that the periodical cleaning of the heat exchanger may further accelerate the corrosion, indicated by the faster decrease of thermal performance and drop of HX weight.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : An evaluation of the effect of corrosion tests on thermal performance of aluminum heat exchangers.
- Identifiant de la fiche : 30028561
- Langues : Anglais
- Source : 2021 Purdue Conferences. 18th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 05/2021
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres communications du même compte rendu (184)
Voir le compte rendu de la conférence
-
The effects of external corrosion protection me...
- Auteurs : WANG Y., ZHAO H., HRNJAK P.
- Date : 2022
- Langues : Anglais
- Source : 2022 Purdue Conferences. 19th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Heat transfer and pressure drop correlations fo...
- Auteurs : LI W., WANG X.
- Date : 07/2010
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 53 - n. 15-16
Voir la fiche
-
Modeling of spray evaporators for salt solutions.
- Auteurs : BOMAN D. B., GARIMELLA S.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
An experimentally validated model of single-pha...
- Auteurs : LI W., HRNJAK P.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
PRACTICAL VERIFICATION OF CALCULATION OF AN AIR...
- Auteurs : CEJKA Z.
- Date : 07/08/1983
- Langues : Anglais
- Source : [Refrigeration serving humanity]. Proceedings of the XVIth international Congress of Refrigeration.
- Formats : PDF
Voir la fiche