Document IIF

Évaporation par film tombant et ébullition libre du HFO-1233zd(E) sur un tube à ailettes basses avec revêtement par aspersion thermique.

Falling film evaporation and pool boiling of HFO1233zd(E) on a low finned tube with thermal spray coating.

Numéro : 1004

Auteurs : UBARA T., SAWATARI K., SUGIMOTO K., ASANO H.

Résumé

A falling film evaporator is attracting attention to reduce the refrigerant filling amount. For heat transfer enhancement of the falling film evaporation, forming and keeping a thin liquid film on the heat transfer surface are important. In this study, thermal spray coating was applied on a low finned tube. The contribution of nucleate boiling in the film evaporation heat transfer of HFO1233zd(E) was evaluated from the comparison in the experimental results of pool boiling using the same test section. The tube length was 50 mm and the diameter at the top of the fins was 19.05 mm. The liquid film flow rate was fixed at 0.033 kg×m–1×s–1 and the heat flux was varied from 10 to 85 kW×m-2. As a result, it was shown that the enhancement factor by the coating was up to 2.0 for falling film evaporation and was higher than the pool boiling.

Documents disponibles

Format PDF

Pages : 7

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Falling film evaporation and pool boiling of HFO1233zd(E) on a low finned tube with thermal spray coating.
  • Identifiant de la fiche : 30028775
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 2nd IIR Conference on HFO Refrigerants and Low GWP Blends
  • Date d'édition : 06/2021
  • DOI : http://dx.doi.org/10.18462/iir.HFO.2021.1004

Liens


Voir d'autres communications du même compte rendu (52)
Voir le compte rendu de la conférence