Partager

Expériences impliquant des échangeurs de chaleur dendritiques à contre courant.

Dendritic counterflow heat exchanger experiments.

Auteurs : SILVA A. K. da, BEJAN A.

Type d'article : Article

Résumé

In this paper, the authors report experimentally the hydraulic and thermal behaviour of a balanced counterflow heat exchanger in which each stream flows through a tree-shaped structure covering a circular area. The tree structure is the same on both sides of the heat exchanger: they have three channels reaching/leaving the centre, and three branching levels (i.e., 24 channels on the periphery of the circular area). On the hot side, fluid is pumped from the center to the periphery. On the cold side, fluid is pumped from the periphery to the centre, and leaves the heat exchanger as a single stream. Two experimental apparatuses were built and tested. In the first design, the body of the heat exchanger was made out of plexiglass and a peripheral plenum was used to collect or distribute the working fluid to the tree structure. The measurements showed that the use of a plenum generates undesirable volumetric flow asymmetries. These lessons led to a second design, which has two major improvements: (i) the heat exchanger core was made out of aluminium and (ii) individual ports (inlets/outlets) were used for each of the peripheral channels. The hydraulic results show a relation between the appearance of volumetric flow rate asymmetries and the bifurcation angles throughout the dendritic structure. The heat transfer results are also discussed. [Reprinted with permission from Elsevier. Copyright, 2005].

Détails

  • Titre original : Dendritic counterflow heat exchanger experiments.
  • Identifiant de la fiche : 2007-1023
  • Langues : Anglais
  • Source : International Journal of thermal Sciences - vol. 45 - n. 9
  • Date d'édition : 09/2006

Liens


Voir d'autres articles du même numéro (2)
Voir la source

Indexation