Document IIF

Experimental investigation on adiabatic two-phase frictional pressure drop of R32, R1234ze(E), and their mixtures in a horizontal minichannel.

Auteurs : LIU N., LIU Y., JI H., SUN D., LI R., DONG C., LIN H.

Type d'article : Article de la RIF

Résumé

This study experimentally investigates the adiabatic two-phase frictional pressure drop characteristics of R32, R1234ze(E), and their binary zeotropic mixtures in a 1.54 mm horizontal smooth minichannel. The effects of mass flux (200–400 kg/(m2⋅s)), vapor quality (0–1), saturation temperature (22–26 ◦C), and mixture composition on the frictional pressure gradient are systematically characterized. The investigated saturation-temperature range of 22–26 ◦C represents near-ambient two-phase cooling conditions relevant to electronics and datacenter thermal management, as well as selected high-temperature air-conditioning or heat-pump applications, rather than conventional low-temperature refrigeration. Mass flux and vapor quality were the dominant parameters.
Within 22–26 ◦C, the temperature effect is secondary relative to mass flux and vapor quality. Pure R1234ze(E) exhibits a markedly higher frictional pressure drop than pure R32, attributable to its considerably greater liquid viscosity and liquid-to-vapor density ratio. All R32/R1234ze(E) mixtures remain close to the R32 baseline and decline with R32 fraction because vapor-phase R32 enrichment counteracts pressure elevation. Compared with hydrocarbon pairs (R290/R600a), R32/R1234ze(E) mixtures demonstrate appreciably lower frictional resistance, which is favorable for reducing pumping power in compact heat exchangers, albeit at the expense of a higher Global Warming Potential. Furthermore, the experimental data were compared with predictions from eight existing two-phase frictional pressure-drop correlations. None of the evaluated correlations provided fully satisfactory predictions across all fluids and mixture compositions. Within the present dataset, the Mauro et al. correlation exhibited the lowest overall mean absolute relative deviation (MARD) of 33.10%, whereas the Tran et al. correlation showed comparatively smaller deviations for R32 and R32-rich mixtures. These correlations should therefore be regarded only as the least-deviating models within the present dataset, rather than as generally reliable design correlations. The present work provides a geometry-specific experimental benchmark for R32/R1234ze(E) mixtures in a 1.54 mm minichannel, highlighting the need for further development and validation of mixture-specific pressure-drop models over broader channel diameters.

Documents disponibles

Format PDF

Pages : 15 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Experimental investigation on adiabatic two-phase frictional pressure drop of R32, R1234ze(E), and their mixtures in a horizontal minichannel.
  • Identifiant de la fiche : 30035304
  • Langues : Anglais
  • Sujet : Technologie
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 190
  • Date d'édition : 10/2026
  • DOI : http://dx.doi.org/https://doi.org/10.1016/j.ijrefrig.2026.107066

Liens


Voir d'autres articles du même numéro (29)
Voir la source