Document IIF

Froid à adsorption à basse température utilisant des mélanges d'eau et d'éthylène glycol.

Adsorption-based low temperature refrigeration using water-ethylene glycol mixtures.

Numéro : pap. n. 261

Auteurs : SEILER J., HACKMANN J., LANZERATH F., et al.

Résumé

Adsorption chilling with the working fluid water is environmentally friendly, but limited to cooling temperatures above 0°C. To expand the operational range of adsorption chillers below the freezing point of water, experiments have been conducted adding ethylene glycol to the evaporator as anti-freezing agent. According to vapour liquid equilibrium data ethylene glycol should remain in the evaporator. Thus, only water should serve as refrigerant. Experiments with cold production at 0°C demonstrate that the adsorption process still works if ethylene glycol is used as anti-freezing agent in the evaporator. Furthermore, measured ethylene glycol concentrations in condenser and evaporator confirm that almost pure water is used as refrigerant. Increasing ethylene glycol concentrations in the evaporator decreases the heat flows. This decrease is caused by reduced heat transfer properties of the ethylene glycol-water mixture. Better heat transfer properties can be achieved by using different evaporator designs allowing low temperature refrigeration in adsorption chillers.

Documents disponibles

Format PDF

Pages : 8 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Adsorption-based low temperature refrigeration using water-ethylene glycol mixtures.
  • Identifiant de la fiche : 30016020
  • Langues : Anglais
  • Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
  • Date d'édition : 16/08/2015
  • DOI : http://dx.doi.org/10.18462/iir.icr.2015.0261

Liens


Voir d'autres communications du même compte rendu (657)
Voir le compte rendu de la conférence