Grincement lors du fonctionnement par à-coups dans une pompe à vide à spirale.
Stick-slip squeal in a dry scroll vacuum pump.
Numéro : pap.1391
Auteurs : CALHOUN J., MOORE J., FORNI R.
Résumé
Vacuum pumps have been described as compressors for rarefied gases. For more than twenty-five years the scroll compressor principle has been used in designing vacuum pumps that do not rely on oil to provide their pumping action. The dry scroll vacuum pump has been particularly successful as a source of rough vacuum for analytical instruments such as liquid-chromatography or gas-chromatography mass spectrometers. Such instruments are typically located in quiet laboratory environments where the scroll vacuum pump may be the only significant source of noise. Consequently, quiet operation is a key requirement of dry scroll vacuum pumps. This paper discusses an occurrence of stick-slip squeal that developed during the design of a new model, low noise, dry scroll pump. Stick-slip phenomena and the associated noise are the result of "self-excited" oscillations related to the difference between static and sliding friction. Rapidly oscillating friction forces occurring during a portion of the orbital cycle can result in induced vibration of the participating surfaces and structure, which radiate high-pitched noise. In the case described, considerable effort was expended in developing a quiet pump design. However, a loud "chirping" noise found in a few late-stage prototypes caused a good deal of concern. It was necessary quickly to fully characterize the vibration behavior within the pump related to the noise and to develop design modifications to ensure that the noise was eliminated. The characteristics of the noise are described for the scroll pump along with the methods utilized to eliminate it from the design.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Stick-slip squeal in a dry scroll vacuum pump.
- Identifiant de la fiche : 30019543
- Langues : Anglais
- Source : 2016 Purdue Conferences. 23rd International Compressor Engineering Conference at Purdue.
- Date d'édition : 11/07/2016
Liens
Voir d'autres communications du même compte rendu (122)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Compresseurs;
Circulation du fluide : tuyauterie, régulation, automatisme, sécurité - Mots-clés : Bruit; Vibration; Conception; Spirale; Pompe à vide
-
An application of co-rotating scroll compressor...
- Auteurs : MORISHITA E., KITORA Y., TOKUMITSU K., NISHIDA M., SASAKI K.
- Date : 16/08/1993
- Langues : Anglais
- Source : Heat pumps in cold climates. Proceedings of the second international technical conference.
Voir la fiche
-
Bruits et vibrations des pompes utilisées dans ...
- Auteurs : AMAND, BRUNET, MATTE, POTTIER
- Date : 05/1993
- Langues : Français
Voir la fiche
-
Characterisation of compressor noise propagatin...
- Auteurs : PAVIC G., TRDAK K., BADIE-CASSAGNET A.
- Date : 23/07/1996
- Langues : Anglais
- Source : Proceedings of the 1996 International Compressor Engineering Conference at Purdue.
Voir la fiche
-
Understanding and addressing sources of noise a...
- Auteurs : PEARSON A.
- Date : 21/08/2011
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Formats : PDF
Voir la fiche
-
Noise and vibration attenuation in piping systems.
- Auteurs : THAU L.
- Date : 05/2014
- Langues : Anglais
- Source : Air Conditioning and Refrigeration Journal - vol. 17 - n. 3
- Formats : PDF
Voir la fiche