Partager

Impact d’un enrobage de cuivre poreux sur l'évaporateur à basse pression assisté par capillaire pour un refroidisseur à adsorption.

Impact of porous copper coating on capillary-assisted low pressure evaporator for an adsorption chiller.

Numéro : AD-YR2-1012

Auteurs : CHEPPUDIRA THIMMAIAH P., HUTTEMA W., BAHRAMI M.

Résumé

Developing a compact low pressure (LP) evaporator with a high overall heat transfer coefficient will have a significant effect in enhancing the performance of adsorption chillers. In an LP evaporator, the operating pressure of the refrigerant (water) is low (~1 kPa) and the performance of a flooded evaporator is negatively affected by the saturation pressure difference along the height of the water column. To resolve this issue, we designed a new capillary assisted low pressure evaporator (CALPE) and performed comprehensive experimental studies to investigate the performance of the CALPE. The results showed that the external thermal resistance on the outside of the evaporator tubes accounts for up to 60% of the overall thermal resistance in the LP evaporator.
To reduce the external thermal resistance the outside surface of the evaporator tubes was coated with highlyporous open-cell copper metalfoam. The overall heat transfer coefficient of the coated CALPE increased by 1.4 times and the cooling power by 2 times.

Détails

  • Titre original : Impact of porous copper coating on capillary-assisted low pressure evaporator for an adsorption chiller.
  • Identifiant de la fiche : 30023091
  • Langues : Anglais
  • Source : International sorption heat pump conference, ISHPC 2017, Tokyo august 7-10.
  • Date d'édition : 07/08/2017

Liens


Voir d'autres communications du même compte rendu (159)
Voir le compte rendu de la conférence

Indexation