Injection de gaz sous forme de vapeur dans un cycle frigorifique utilisant la technologie à piston.
Gas vapor injection on refrigerant cycle using piston technology.
Numéro : pap. 2228
Auteurs : COLMEK S., GODERNEAUX L.
Résumé
Gas vapor injection on refrigerant cycle is always used with Scroll, Rotary or others compressors technology to improve efficiency of the system at low and high ambient temperatures. Probably this kind of compressor is more adapted than the piston technology owing to their mechanical system. In this paper, we present the challenge of vapor injection realized on piston technology compressor range non for improving the cooling capacity of the system but to maintain the compressor temperature in conformity without damage the capacity. Indeed, the principal action of gas injection is to refresh the mechanical system according to the ambient temperature for improving the capacity of the system. In this case of study, the compressor is enclosure on a room without opening at the ambient, thus the temperature of the compressor exceed 130°C, which is the limit temperature of compressor functioning. To reduce the compressor temperature on this refrigerant cycle a gas injection is done from output of condenser to the input of the compressor thanks to the capillary tubes. Therefore, the quantity of gas injection must be sufficient to reduce the temperature, and not damage the capacity of the system. In addition, the piston technology compressor is more sensitive than the others compressors technologies because the compressor valve behavior could be damaged by the liquid phase of the refrigerant. That why the capillary tubes and the density of gas are defined by simulation and the results have been comforted by test. Thus, thanks to gas injection, we can reduce the temperature of the compressor on the refrigerant system with only a capillary tube.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Gas vapor injection on refrigerant cycle using piston technology.
- Identifiant de la fiche : 30006214
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 16/07/2012
Liens
Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence
Indexation
- Thèmes : Compresseurs
- Mots-clés : Vapeur; Rendement; Puissance frigorifique; Simulation; Injection; Compresseur à piston
-
Efficiency improvement of the reciprocating com...
- Auteurs : SLAVIK Z., MITCHELL R.
- Date : 02/09/2013
- Langues : Anglais
- Source : Compressors 2013: 8th International Conference on Compressors and Coolants.
- Formats : PDF
Voir la fiche
-
Analysis of variable speed vapor injection scro...
- Auteurs : TELLO-OQUENDO F. M., NAVARRO-PERIS E., GONZÁLVEZ-MACIÁ J.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Optimal intermediate pressure of vapor compress...
- Auteurs : TELLO-OQUENDO F. M., NAVARRO-PERIS E., GONZÁLVEZ-MACIÁ J.
- Date : 19/06/2018
- Langues : Anglais
- Source : CYTEF 2018. IX Congreso Ibérico y VII Congreso Iberoamericano de Ciencias y Técnicas del Frío, Valencia, España, 19-21 junio 2018.
- Formats : PDF
Voir la fiche
-
Semi-empirical model of scroll compressors and ...
- Auteurs : TELLO-OQUENDO F. M., NAVARRO-PERIS E., BARCELÓ RUESCAS F., et al.
- Date : 10/2019
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 106
- Formats : PDF
Voir la fiche
-
Development of a water-injected twin-screw comp...
- Auteurs : SHEN J., XING Z., ZHANG K., et al.
- Date : 25/02/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 95
Voir la fiche