Partager

Interrelation entre la longueur des picots et la performance d'un échangeur de chaleur.

Interrelation between pin length and heat exchanger performance.

Auteurs : SAHITI N.

Type d'article : Article

Résumé

One of parameters influencing pin performance in a heat exchanger is pin length. The optimization of these parameters usually is carried out by considering pin as single heat transfer element operating under some ideal conditions. Optimal pin performance parameters derived in such analysis might not result in optimal heat exchangers. Current paper focuses in such inconsistencies and proposes a novel approach to be followed by optimization of pin length of a practical heat exchanger. The approach proposed in current paper consist in introducing of a corrected pin length in order to consider the influence of channel height carrying fluid on the opposite site to the heat exchanger channels employing pin fins. In the paper is demonstrated that by following the proposed approach one can derive optimal pin length to pin diameter ratios which results in optimal pin performance figures respectively in optimal performance of entire heat exchangers. The approach proposed here, in principle may be used to optimize other fins of other forms commonly used in flat plate and fin heat exchangers.

Détails

  • Titre original : Interrelation between pin length and heat exchanger performance.
  • Identifiant de la fiche : 30017187
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 91
  • Date d'édition : 05/12/2015
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2015.08.089

Liens


Voir d'autres articles du même numéro (57)
Voir la source

Indexation