Partager

Le système cryogénique des supraconducteurs du centre d'essais ITER CC.

The cryogenic system for ITER CC superconducting conductor test facility.

Auteurs : PENG J., WU Y., LIU H., et al.

Type d'article : Article

Résumé

This paper describes the cryogenic system of the International Thermonuclear Experimental Reactor (ITER) Correction Coils (CC) test facility, which consists of a 500 W/4.5 K helium refrigerator, a 50 kA superconducting transformer cryostat (STC) and a background field magnet cryostat (BFMC). The 500 W/4.5 K helium refrigerator synchronously produces both the liquid helium (LHe) and supercritical helium (SHe). The background field magnet and the primary coil of the superconducting transformer
(PCST) are cooled down by immersing into 4.2 K LHe. The secondary Cable-In-Conduit Conductor (CICC) coil of the superconducting transformer (SCST), superconducting joints and the testing sample of ITER CC are cooled down by forced-flow supercritical helium. During the commissioning experiment, all the superconducting coils were successfully translated into superconducting state. The background field magnet was fully cooled by immersing it into 4.2 K LHe and generated a maximal background magnetic field of 6.96 T; the temperature of transformer coils and current leads was reduced to 4.3 K; the inlet temperature of SHe loop was 5.6 K, which can meet the cooling requirements of CIC-Conductor and joint boxes. It is noted that a novel heat cut-off device for High Temperature Superconducting (HTS) binary current leads was introduced to reduce the heat losses of transformer cryostat.

Détails

  • Titre original : The cryogenic system for ITER CC superconducting conductor test facility.
  • Identifiant de la fiche : 30000680
  • Langues : Anglais
  • Source : Cryogenics - vol. 51 - n. 1
  • Date d'édition : 01/2011
  • DOI : http://dx.doi.org/10.1016/j.cryogenics.2010.11.004

Liens


Voir d'autres articles du même numéro (3)
Voir la source

Indexation