Membranes polymères pour échangeurs enthalpiques.

Polymer Membranes for Enthalpy Exchangers.

Auteurs : KRIŽO K., KAPJOR A., HOLUBČÍK M.

Type d'article : Article de périodique

Résumé

A membrane-based enthalpy exchanger is a device used for heat and humidity recovery in ventilated buildings. The energy-saving potential of such a device is dependent on the parameters responsible for heat and moisture recovery. The trend is toward composite membranes, which are custom produced, and their parameters can be adjusted for a given application; therefore, the diffusion and sorption characteristics of such membranes are unknown. In order to obtain the values of the water vapor diffusivity of three investigated handmade membranes, a serial resistance model using a Field and Laboratory Emission Cell (FLEC) is proposed. Experiments were conducted to identify the resistance in each step of the moisture transfer process to extract the moisture diffusivity in the membranes. The calculated moisture diffusivities in the membranes were 8.99 × 10−12 (m2/s) for the membranes from cellulose acetate, 1.9 × 10−10 (m2/s) for the microporous PE/PUR membranes, and 1.53 × 10−11 (m2/s) for the PET/PUR microfibrous membranes. The obtained membrane diffusivities were then used in the proposed effectiveness-NTU-based model of an exchanger with a cross-flow arrangement to predict performance under various operating conditions. The results show that the highest latent effectiveness was found for the exchanger core made from the PE/PUR membrane and the lowest was for the one with the PE/PUR membrane core.

Documents disponibles

Format PDF

Pages : 22 p.

Disponible

Gratuit

Détails

  • Titre original : Polymer Membranes for Enthalpy Exchangers.
  • Identifiant de la fiche : 30030416
  • Langues : Anglais
  • Sujet : Technologie
  • Source : Energies - vol. 15 - n. 16
  • Éditeurs : MDPI
  • Date d'édition : 08/2022
  • DOI : http://dx.doi.org/10.3390/en15166021

Liens


Voir d'autres articles du même numéro (8)
Voir la source