Document IIF

Mesures du transfert de chaleur et corrélation entre les mesures et l'ébullition en écoulement du frigorigène à l'intérieur d'un tube rempli de mousse de cuivre.

Heat transfer measurements and correlation of refrigerant flow boiling in tube filled with copper foam.

Auteurs : ZHU Y., HU H., SUN S., et al.

Type d'article : Article, Article de la RIF

Résumé

Flow boiling heat transfer characteristics of refrigerant in tubes filled with metal foams were experimentally investigated at a saturation temperature of 7°C, mass flux from 10 to 90 kg m-2 s-1, vapor quality from 0.1 to 0.8 and heat flux from 3.1 to 18.3 kW m-2. The refrigerant is R410A. The test sections are tubes with inner diameter of 23.4 or 13.8 mm, filled with 5 or 10 PPI copper foam. The experimental results reveal that, metal foam enhances the flow boiling heat transfer by a maximum of 220% and promotes the flow pattern transition from stratified flow to stratified-wavy flow and from stratified-wavy flow to annular flow. The heat transfer coefficient decreases with vapor quality under low mass flux, while it increases with vapor quality under high mass flux. A correlation for predicting the flow boiling heat transfer was developed and it agrees well with the experimental data.

Documents disponibles

Format PDF

Pages : 215-226

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Heat transfer measurements and correlation of refrigerant flow boiling in tube filled with copper foam.
  • Identifiant de la fiche : 30010362
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 38
  • Date d'édition : 02/2014

Liens


Voir d'autres articles du même numéro (34)
Voir la source