Modèle mathématique pour la prévision de la performance d'une roue déshydratante composite (un modèle de roue déshydratante composite).
A mathematical model for predicting the performance of a compound desiccant wheel (a model of compound desiccant wheel).
Auteurs : GE T. S., ZIEGLER F., WANG R. Z.
Type d'article : Article
Résumé
A mathematical model for predicting the performance of novel silica gel haloid compound desiccant wheel is established. Both the gas side resistance and the solid side resistance are considered in the model. It is found that the results of this model agree better to the experiments than the results of a former model which does not take the solid side resistance into account at all. Then the model is adopted to analyze the effects of some main parameters on system performance. It is found that the compound desiccant wheel has a better performance in a climate with moderate temperature or in a climate with high humidity ratio. Then under the basic conditions for the simulations (ambient air is 35°C, 15 g/kg and wheel thickness of 100 mm), an angle of the regeneration section between 100° and 160°, a regeneration temperature between 80 and 95°C, a flow rate of process air between 2.0 and 3.5 m/s and that of regeneration air between 2.5 and 3.5 m/s are recommended. Also, there exists an optimal rotation speed to achieve the maximal moisture removal, which is about 12 r/h. At last, the influences of the main parameters on optimal rotation speed are discussed. [Reprinted with permission from Elsevier. Copyright, 2010].
Détails
- Titre original : A mathematical model for predicting the performance of a compound desiccant wheel (a model of compound desiccant wheel).
- Identifiant de la fiche : 30001431
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 30 - n. 8-9
- Date d'édition : 06/2010
- DOI : http://dx.doi.org/10.1016/j.applthermaleng.2010.01.012
Liens
Voir d'autres articles du même numéro (10)
Voir la source
-
Mathematical investigation of purge sector angl...
- Auteurs : YADAV L., YADAV A.
- Date : 25/01/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 93
Voir la fiche
-
Measurements of effectiveness in a silica gel r...
- Auteurs : NETI S., WOLFE E. I.
- Date : 03/2000
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 20 - n. 4
Voir la fiche
-
Performance comparison between a solar driven r...
- Auteurs : GE T. S., ZIEGLER F., WANG R. Z., et al.
- Date : 05/2010
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 30 - n. 6-7
Voir la fiche
-
Desiccant dewpoint cooling system independent o...
- Auteurs : BELLEMO L., ELMEGAARD B., MARKUSSEN W. B., et al.
- Date : 16/08/2015
- Langues : Anglais
- Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
- Formats : PDF
Voir la fiche
-
Potential study of desiccant wheel-based water ...
- Auteurs : GLÜCK C., ROLDAN BLASCO E., LENZ B., et al.
- Date : 06/04/2011
- Langues : Anglais
- Source : Sources/sinks Alternative to the Outside Air for Heat Pump and Air-conditioning Techniques (Alternative Sources - AS), Padua, Italy, April 5-7, 2011. / International Sorption Heat Pump Conference (ISHPC11), Padua, Italy, April 6-8, 2011.
- Formats : PDF
Voir la fiche