Modélisation d'un matériau à changement de phase multicouche dans un tube triplex sous diverses conditions de limites thermiques
Modeling of multi-layer phase change material in a triplex tube under various thermal boundary conditions
Auteurs : SEFIDAN A. M., SANGARI M. E., SELLIER M., KHAN I. H., SAHA S. C.
Type d'article : Article de périodique
Résumé
Nowadays, limited energy resources face ever-growing demands of the modern world. One engineering approach to mitigate this problem which has received considerable attention in recent years is using latent heat thermal storage (LHTS) systems, a significant opportunity which is provided by phase change materials (PCMs). In the present study, a numerical investigation was devoted to estimate the simultaneous freezing and melting processes of a double-layer PCM in terms of heat transfer and fluid flow phenomena. A double-pipe cylindrical channel with two compartments, A and B, was considered for locating two PCMs of RT28 and RT35 in various arrangements. The inner and outer walls were exposed to both hot and cold heat transfer fluids (HHTFs and CHTFs, respectively) beginning with solid or liquid initial state, which led to solid–liquid phase change process through PCMs. The numerical simulation was handled by a two-dimensional finite volume method (FVM) with a fixed Rayleigh number of 106 in which conduction and convection heat transfer mechanisms
are taken into account. The effects of employing double-layer PCM and their arrangements, inner and outer walls’ boundary conditions, and initial statuses of PCMs are discussed, and the details of the compared results are shown in the form of temperature and liquid fraction variations over time.
Documents disponibles
Format PDF
Pages : 14 p.
Disponible
Gratuit
Détails
- Titre original : Modeling of multi-layer phase change material in a triplex tube under various thermal boundary conditions
- Identifiant de la fiche : 30029853
- Langues : Anglais
- Sujet : Technologie
- Source : Energies - vol. 15 - n. 9
- Éditeurs : MDPI
- Date d'édition : 05/2022
- DOI : http://dx.doi.org/doi.org/10.3390/ en15093465
Liens
Voir d'autres articles du même numéro (12)
Voir la source
Indexation
-
Impact of Geometry on a Thermal-Energy Storage ...
- Auteurs : PRIVITERA E., CAPONETTO R., MATERA F., VASTA S.
- Date : 11/2022
- Langues : Anglais
- Source : Energies - vol. 15 - n. 21
- Formats : PDF
Voir la fiche
-
Numerical study of PCM based TMS for Li-Ion cells.
- Auteurs : GUARDA D., CALATI M., DELGADO W., LANDINI S, WASER R., STAMATIOU A., O'DONOVAN S., MANCIN S.
- Date : 01/09/2021
- Langues : Anglais
- Source : 13rd IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: (online) Vicenza, Italy, September 1-3, 2021.
- Formats : PDF
Voir la fiche
-
Performance enhancement of ice storage capsules...
- Auteurs : WU L., YU J., YANG J., GAO W., ZHANG C., YU C.
- Date : 02/2024
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 158
- Formats : PDF
Voir la fiche
-
Numerical model calibration for composite-PCM L...
- Auteurs : NALDI C., DONGELLINI M., SALVI F., SILVESTRINI M., FALCONE M., MORINI G. L.
- Date : 01/09/2021
- Langues : Anglais
- Source : 13rd IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: (online) Vicenza, Italy, September 1-3, 2021.
- Formats : PDF
Voir la fiche
-
Numerical study and validation of melting and s...
- Auteurs : ALAM T., BACELLAR D., LING J., AUTE V.
- Date : 05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 18th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche