Document IIF
Modélisation d'un réfrigérateur à accumulation thermique.
Modelling of a thermal storage refrigerator.
Numéro : pap. ID: 496
Auteurs : MARQUES C., DAVIES G., EVANS J. A., et al.
Résumé
The paper investigates the effect of adding a phase change material in thermal contact with the evaporator in a natural convection domestic refrigerator. The enthalpy method has been applied to investigate the heat release and storage rate of encapsulated ice. The effect of three parameters was investigated by the numerical method: PCM thickness, ambient temperature and evaporating temperature. The results showed that the melting and freezing time increased proportionally with PCM thickness. The refrigerator autonomy was reduced by 48% when the ambient temperature was increased from 20°C to 43°C and the freezing time increased by 27% when the evaporating temperature was reduced from -10°C to -15°C. A CFD simulation of the airflow and temperature distribution in the natural convection refrigerator was carried out to evaluate the most effective position to place the PCM (top or back wall). The predicted airflow patterns and temperature profiles were considerably different for the two PCM orientations. The predicted air temperature was above 5ºC, thus a eutectic PCM may be required to reduce the temperature in the refrigerator compartment.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Modelling of a thermal storage refrigerator.
- Identifiant de la fiche : 30003217
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Date d'édition : 21/08/2011
Liens
Voir d'autres communications du même compte rendu (569)
Voir le compte rendu de la conférence
-
Numerical simulation of heat storage for domest...
- Auteurs : TORRAS S., LEHMKUHL O., RIGOLA J., et al.
- Date : 21/08/2011
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Formats : PDF
Voir la fiche
-
Application of phase-change materials to domest...
- Auteurs : MARQUES C., DAVIES G., MAIDMENT G., et al.
- Date : 01/09/2010
- Langues : Anglais
- Source : 9th Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: Sofia, Bulgaria, September 29-October 1, 2010.
- Formats : PDF
Voir la fiche
-
Household refrigerators and freezers with high ...
- Auteurs : LEDUCQ D., SOYSAL A., ALVAREZ G.
- Date : 02/04/2013
- Langues : Anglais
- Source : 2nd IIR International Conference on Sustainability and the Cold Chain. Proceedings: Paris, France, April 2-4, 2013.
- Formats : PDF
Voir la fiche
-
Réfrigérateurs domestiques à haute inertie ther...
- Auteurs : LEDUCQ D.
- Date : 07/2013
- Langues : Français
- Source : Revue générale du Froid & du Conditionnement d'air - vol. 103 - n. 1135
- Formats : PDF
Voir la fiche
-
The use of phase change materials in domestic r...
- Auteurs : MARQUES C., DAVIES G., MAIDMENT G., et al.
- Date : 02/2013
- Langues : Anglais
- Source : International Institute of Refrigeration
Voir la fiche