Partager

Modélisation de la caractéristique du facteur de charge du rotor d’un compresseur centrifuge industriel.

Modeling the loading factor characteristic of an industrial centrifugal compressor impeller.

Numéro : 147

Auteurs : GALERKIN Y., SOLOVYEVA O. A., SOLDATOVA K. , NIKIFOROV A.

Résumé

Test data on compressor stages demonstrate that loading factor versus flow coefficient at an impeller exit is of linear character independent of compressibility. Mathematical models of the Universal Modeling Method use this pattern at their core. In the first versions of the Method, two points determined the loading factor characteristic: loading factor at the design point, and at zero flow rate. To calculate these parameters, the user had to define values of two empirical coefficients. The choice of the coefficient is based on experience. An attempt to obtain approximating formulas for these coefficients did not lead to a result with the required accuracy.
In the modern version of the Method, the loading factor characteristic is defined by the angle of its inclination to the ordinate axis and by the loading factor at zero flow rate. The authors have researched test performances of model stages. Simple and definite equations with four geometric parameters were proposed for loading factor characteristics. The calculation error is 1%.
A trailing edge shape influences the loading factor. Blunt and symmetrically tapered blades have the same loading factor. Non-symmetric tapering changes the loading factor by up to plus/minus 4%. The results of impeller tests with different blade trailing edges and with vane and vaneless diffusers were generalized. The influence of these factors was taken into account as correcting coefficients in the formulas. The alternative model of loading factor characteristic modeling is included in the Universal Modeling Method and demonstrates good results in design practice.

Documents disponibles

Format PDF

Pages : 12

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Modeling the loading factor characteristic of an industrial centrifugal compressor impeller.
  • Identifiant de la fiche : 30028982
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 12th International Conference on Compressors and their Systems
  • Date d'édition : 09/2021
  • Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.

Liens


Voir d'autres communications du même compte rendu (63)
Voir le compte rendu de la conférence

Indexation