Résumé
The present study focuses on aspects of EHL that have both positive and negative effects on the lubrication performance of the thrust slide-bearings in scroll compressors. Theoretical calculations using the average Reynolds equation of Patir-Cheng and the solid contact theory from Greenwood & Williamson, for the boundary of the local elastic deformation of the thrust slide-bearing, were conducted for a small cooling capacity scroll compressor driven at 3600 rpm with 0.1 kW. An approximate method was developed using characteristic curves to determine the oil film axial force, the average oil film thickness, the friction force and the friction coefficient. The calculations considered a variety of pressure differences due to the operating pressure and the thickness of thrust plate. Also, cases with a fixed uniform wedge angle at the periphery were calculated. The calculated results suggest a possible maximum reduction in friction coefficient of about 55% compared to that with a fixed uniform wedge angle. The reduction rate increases with decreasing thrust plate thickness, which, however, restricts the operating pressures to a lower pressure range. Design guidelines for optimizing EHL are suggested.
Documents disponibles
Format PDF
Pages : 10 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Optimization of EHL performance in thrust slide-bearings of scroll compressors.
- Identifiant de la fiche : 30013993
- Langues : Anglais
- Source : 2014 Purdue Conferences. 22nd International Compressor Engineering Conference at Purdue.
- Date d'édition : 14/07/2014
Liens
Voir d'autres communications du même compte rendu (138)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Compresseurs;
Lubrifiants - Mots-clés : Frottement; Lubrification; Palier; Simulation; Performance; Optimisation; Huile; Film; Compresseur à spirale
-
Elasto-hydrodynamic lubrication effect in thrus...
- Auteurs : ISHII N., TSUJI T., OKU T., et al.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 21st International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Hydrodynamic pressure induced elastic deformati...
- Auteurs : ISHII N., TSUJI T., ANAMI K., et al.
- Date : 14/07/2014
- Langues : Anglais
- Source : 2014 Purdue Conferences. 22nd International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Numerical analysis and optimization for hydrody...
- Auteurs : YU B., YANG O. X., XU J., WEI H. J., ZHAO H. H.
- Date : 05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 25th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Lubrication tests to support optimal performanc...
- Auteurs : ISHII N., NONOGUCHI N., ANAMI K., et al.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 23rd International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Modeling of a semi-hermetic CO2 reciprocating c...
- Auteurs : YANG B., BRADSHAW C. R., GROLL E. A.
- Date : 11/2013
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 7
- Formats : PDF
Voir la fiche