Performance sensible du côté air des échangeurs de chaleur à tubes ailetés : données avec un tube à grand diamètre.
Sensible air-side performance of fin-and-tube heat exchangers: data with larger diameter tube.
Auteurs : LIU Y. C., HU R., YANG B. C., et al.
Résumé
This study presents the air-side performance of the fin-and-tube heat exchangers having plain fin geometry with a larger diameter tube (Dc= 16.88 mm). The effect of tube row and fin pitch on the airside are examined. It is found that the effect of fin pitch on the Colburn j factor is negligible at N= 2. However, a notable drop of heat transfer performance is seen when the number of tube row is increased to eight. The effect of tube row on the friction factor is almost negligible. However, unlike those of friction factor, the Colburn j factor reveals a different characteristic subject to the influence of the number of tube row. If the fin pitch is above a certain threshold value (Fp= 3 to about 4 mm), the influence of tube row on Colburn j-factor is very small. However, if the fin pitch is below this threshold value, the Colburn j-factor exhibits a considerable drop with the rise of the number of tube row. This phenomenon is especially pronounced at low Reynolds number region. It is likely that this phenomenon is related to the complex flow field interactions between the tube row and fin surfaces. The Wang et al.'s correlation (2000) gives fairly good predictive ability against the present friction factor but under-predicts the j-factor slightly. Based on the present database, a correlation is developed that can describe the j-factor with a 3.99% mean deviation and the f-factor with a 2.83% deviation.
Détails
- Titre original : Sensible air-side performance of fin-and-tube heat exchangers: data with larger diameter tube.
- Identifiant de la fiche : 2009-1468
- Langues : Anglais
- Source : ASHRAE Transactions. 2008 Winter Meeting, New York City, NY. Volume 114, part 1 + CD-ROM.
- Date d'édition : 19/01/2008
Liens
Voir d'autres communications du même compte rendu (18)
Voir le compte rendu de la conférence
Indexation
-
Natural convection heat transfer for fin-tube h...
- Auteurs : CHUAH Y. K., CHEN C. T.
- Date : 2004
- Langues : Anglais
- Source : ASHRAE Transactions. 2004 Annual Meeting, Nashville, Tennessee, USA. Volume 110, part 2 + CD-ROM.
Voir la fiche
-
A-type heat exchanger simulation using 2-D CFD ...
- Auteurs : ABDELAZIZ O., SINGH V., AUTE V., et al.
- Date : 14/07/2008
- Langues : Anglais
- Source : 2008 Purdue Conferences. 19th International Compressor Engineering Conference at Purdue & 12th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
- Formats : PDF
Voir la fiche
-
Decoupled modelling of chilled-water cooling co...
- Auteurs : WANG G., LIU M., CLARIDGE D. E.
- Date : 27/01/2007
- Langues : Anglais
- Source : ASHRAE Transactions. 2007 Winter Meeting. Volume 113, part 1 + CD-ROM.
Voir la fiche
-
Development of simple cooling coil models for s...
- Auteurs : LEMORT V., LEBRUN J., CUEVAS C., et al.
- Date : 19/01/2008
- Langues : Anglais
- Source : ASHRAE Transactions. 2008 Winter Meeting, New York City, NY. Volume 114, part 1 + CD-ROM.
Voir la fiche
-
Investigation of R-22 condensing outside of a h...
- Auteurs : LIANG X., ZHAI L, ZHUANG R., et al.
- Date : 17/07/2006
- Langues : Anglais
- Source : 2006 Purdue Conferences. 18th International Compressor Engineering Conference at Purdue & 11th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
- Formats : PDF
Voir la fiche