Partager

Document IIF

R22 et R410A : transfert de chaleur lors de l'évaporation sur des tubes horizontaux lisses et à microailettes.

Evaporating heat transfer of R22 and R410A in horizontal smooth and microfin tubes.

Auteurs : KIM M. H., SHIN J. S.

Type d'article : Article, Article de la RIF

Résumé

An experimental investigation of evaporating heat transfer in 9.52 mm O.D. horizontal copper tubes was conducted. The refrigerants tested were R22 and the near-azeotropic mixture, R410A. The test rig had a straight, horizontal test section with an active length of 0.92 m and was heated by the heat transfer fluid (hot water) circulated in a surrounding annulus. Constant heat flux of 11.0 kW/m2 was maintained and refrigerant quality varied from 0.2 to 0.8. The results were reported for evaporation at 15 °C in a 0.92 m long test section for 30-60 kg/h mass flow rate. The local and average heat transfer coefficients for seven microfin tubes were presented compared to those for a smooth tube. The average evaporation heat transfer coefficients of R22 and R410A for the microfin tubes were 1.86-3.27 and 1.64-2.99 times higher than those for the smooth tube, respectively. When compared to R22 at the same test conditions, the evaporating heat transfer coefficients for R410A were 97-129% of R22.

Documents disponibles

Format PDF

Pages : 940-948

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Evaporating heat transfer of R22 and R410A in horizontal smooth and microfin tubes.
  • Identifiant de la fiche : 2005-2468
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 28 - n. 6
  • Date d'édition : 09/2005

Liens


Voir d'autres articles du même numéro (16)
Voir la source

Indexation